JVC SR-DVM70US Auto Clock Set/Auto Tuner Set, NOTES:, ATTENTION:, INFORMATION, INITIAL SETTINGS EN, During Auto Clock Set, Plug & Play Completed, During Auto Channel Set

		INITIAL SETTINGS EN 19
	Plug & Play Set	1 Connect the antenna cable to the unit. (A pg. 18) Then connect
		the AC power cord to an AC outlet. Do not turn on the unit.
		The clock and tuner channels will be set automatically.
Auto Clock Set/Auto Tuner Set
		● ALOADINGB blinks on the front display panel when the AC plug
		of the AC power cord is connected into an AC outlet and it takes
This unit sets the clock and tuner channels automatically when AC		approximately 50 seconds for the unit to be turned on. This is
power cord is first connected to an AC outlet. The antenna cable		not a malfunction.
must be connected for the Plug & Play setting.		NOTES:
The time and date can be set automatically by the clock setting		● Auto Clock Set is performed first.
data transmitted from one of the regular TV broadcast channels.
		AAUTOB blinks on the front display panel during Auto Clock Set.
We call this TV channel the “host channel” and it is a PBS channel
		● Auto Channel Set is performed next. Auto Channel Set scans all
in your area.
		the channels that are receivable by your unit. During Auto
		Channel Set, the channel numbers are displayed as they are
ATTENTION:
		scanned and set.
● If you use a cable box, Plug & Play will not function; set the
		● When Plug & Play setting has been completed successfully, the
	clock and tuner channels separately. ( pg. 21 – 22)
		correct clock time is displayed. If you perform Plug & Play setting
● Depending on areas or reception conditions, the unit may not
		successfully, there is no need to perform AClock SetB (A pg. 21)
	receive the Auto clock setting data from the PBS channel. If
		and ATuner SetB (A pg. 22). If, however, you want to add or
	this function is taking a considerable amount of time, it may be
		delete channels, refer to AManual Channel SetB (A pg. 22).
	necessary to perform the Semiauto or Manual Clock Set
		During Auto Clock Set
	procedure.
		AAUTOB blinks.

	During Auto Channel Set
	The channel numbers are displayed and AAUTOB blinks as they
	are scanned and set.
INFORMATION
● If AAUTO CLOCKB is set to AONB (A pg. 21), the clock will be
adjusted automatically by the host channel every hour (except
11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming	Plug & Play Completed
PBS channel clock setting data. (This automatic clock
	The current time is displayed.
adjustment can only be performed when the unit is turned off.
	● If an incorrect clock time or AcB appears on the front display
The clock will be adjusted just on these hours — on the time
	panel, see AWhat to do if Plug & Play setting failedB (A pg. 19).
displayed on the front display panel, not on the actual real
time.) The default setting of AAUTO CLOCKB is AONB.
(A pg. 21)
● If the memory backup fails, because a power outage occurs or
because the AC power cord is unplugged, Plug & Play will be
performed when power is restored to the unit.

What to do if Plug & Play setting failed

●If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform ASemiauto Clock SetB (A pg. 21) or AManual Clock SetB (A pg. 21).

●If AcB appears on the front display panel, your antenna cable may not be connected to the unit or there may not be a Host PBS signal available in your area. Ensure that the antenna cable is connected correctly. Then turn on and off the unit; the Plug & Play setting will be automatically reactivated. If Plug & Play setting is not performed though the antenna cable is connected correctly, perform AManual Clock SetB (A pg. 21) and AAuto Channel SetB (A pg. 22) or AManual Channel SetB (A pg. 22).