62 EN EDITING

Edit From A Camcorder

 

● Slide the TV/CABLE/DBS/DVD switch to DVD.

 

 

 

 

You can use a camcorder as the source player and your unit as the

1 Make connections.

A If the camcorder has no S-VIDEO output connector:

recording deck. If your camcorder has a DV IN/OUT connector,

^ connect the camcorder’s AUDIO/VIDEO OUT connectors to

you can use the camcorder as the recording deck and your unit as

the unit’s [VIDEO/AUDIO ((MONO) L/R)] input connectors

the source player.

 

 

 

 

 

 

on the front panel.

 

 

 

 

A If the camcorder has no S-VIDEO output connector:

● When using a monaural camcorder, connect its AUDIO OUT

connector to the [AUDIO-L] input connector on your unit.

 

 

 

 

 

 

 

 

B If the camcorder has an S-VIDEO output connector:

 

 

 

 

^ connect the camcorder’s AUDIO OUT and S-VIDEO OUT

 

 

 

 

connectors to the unit’s [AUDIO] and [S-VIDEO] input

 

 

 

 

connectors on the front panel.

 

 

 

 

C If the camcorder has a DV IN/OUT connector:

 

To [VIDEO/AUDIO

Recorder

^ connect the camcorder’s DV IN/OUT connector to the unit’s

 

((MONO) L/R)] input

 

[DV IN/OUT] connector.

 

 

 

 

● When using your unit as the source player, refer to the

 

 

Audio/video cable

 

camcorder’s instruction manual for the recording procedure.

 

 

 

2 Press DV/HDD/DVD on the unit repeatedly to select the

 

 

(not supplied)

 

 

 

 

 

recording deck.

 

 

 

 

3 Press CH +/- to select AF-1Bor ADVB.

 

 

 

 

● Set AFRONT AUX F-1Bto AVIDEOB for the [VIDEO] input

 

 

 

 

connector, or AS-VIDEOBfor the [S-VIDEO] input connector,

 

 

 

 

depending on the connector being used. (A pg. 72)

 

 

AUDIO/VIDEO OUT

 

4 Press REC MODE repeatedly to set the recording mode.

 

 

 

 

 

 

Player

 

5 Start playback on the camcorder slightly before the actual point

 

 

 

 

from where you wish to start dubbing.

B If the camcorder has an S-VIDEO output connector:

6 Press Ron the unit to start recording. Or while holding R, press

 

 

 

 

I on the remote control. The dubbing starts.

 

 

 

 

7 Press o on the unit, then stop playback on the camcorder.

 

 

 

 

NOTES:

 

 

 

 

● All necessary cables can be obtained from your dealer.

 

 

 

 

● Refer to the camcorder’s instruction manual for operating

To [S-VIDEO]

 

To [AUDIO] input

Recorder

procedure.

 

● The quality of dubbed picture becomes poorer than that of the

input

 

 

 

 

 

 

original.

 

 

 

 

 

 

 

 

● When you are editing through the [DV IN/OUT] connector, the

 

 

 

 

unit will stop if the player begins playing a blank portion of tape or

 

 

 

 

the signal is interrupted.

 

 

 

 

● When connecting the unit to a device equipped with a DV input

S-video cable

S-VIDEO

Audio cable

connector, be sure to use the optional DV cable (VC-VDV204U)

(not supplied)

● To edit through the [DV IN/OUT] connector using the HDD or

OUTPUT

(not

 

 

DVD deck, refer to ADV Dubbing (HDD & DVD Deck Only)B

 

 

 

supplied)

 

 

 

(A pg. 60).

 

 

 

 

AUDIO OUTPUT

Player

CIf the camcorder has a DV IN/OUT connector:

Recorder/Player

To [DV IN]

DV cable (VC-VDV 204VU)

(not supplied)

DV connector

Player/Recorder