Dubbing/Importing

Importing Data from a BD/ DVD to the HDD (Continued)

7Select “START”, and press the [OK] button

1Select “RECORDING MODE”, press the [OK] button, and select “RECORDING MODE” from the recording mode selection screen

vSelect the “RECORDING MODE” option.

.

vImporting of titles starts according to the sequence in the created title list.

vAfter titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor.

.

Note:

v“START” cannot be selected for the following cases.vA title that cannot be dubbed has been selectedvHDD memory is insufficient

vThe amount of titles in the HDD has reached the maximum amount

vA dubbing title list has not been createdImporting DVD-VIDEO

When DVD-VIDEO is detected, a recording mode selection screen appears.

Follow the steps below to import DVD-VIDEO to the HDD.

.

For more details, refer to “Recording Modes” (A page 28) .

2Select “START”, and press the [OK] button v Importing of the titles starts.

vAfter titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor.

.

Memo:

vIf the first play setting of the DVD-video has been set to top menu or other settings, the title will not playback.

If playback does not start, press the play button or playback the DVD-Video.

Canceling importing

mTo cancel importing before it starts

vSelect “CANCEL” from the menu, and press the [OK] button to cancel importing of a title.

vAlternatively, you can press the [RETURN] button to cancel importing and return to the initial screen.

mTo cancel importing while it is in progress

vPress the [OPTION] button to display the pop-up menu. Select “CANCEL” from the pop-up menu and press the [OK] button. Data will be written onto the disc up to the point where import is cancelled.

vImporting will also be stopped when the [o] button is pressed to stop playback.

32