Dubbing/Importing

Copying the Entire Disc

Copying the entire disc allows all content on a BD (BDMV) or DVD (AVCHD, DVD-Video) to be copied onto another disc.

Note:

vContent cannot be copied to a formatted BD-R or DVD-R disc. Make use of an unformatted disc.

vUse a DVD-R/-RW instead of a BD-R/-RE or DVD when the source disc is a BD disc.

vThe disc to be copied onto will be formatted when copy is performed. Check that the disc has not been used before or if it is ok to delete data on the disc when using a BD-RE or a DVD-RW.

vIn the case of BD, volume labels are not copied.

vIf an unsupported disc is set, “UNABLE TO IMPORT FROM DISC” or “UNABLE TO DUB ONTO DISC INSERT ANOTHER DISC” will be displayed on the monitor. Use a disc that is supported by this unit.

For details on discs that are supported by this unit, refer to “Discs that enable both dubbing and playback” (A page 10) and “Discs that enable playback only” (A page 10) .

1Press the [DUBBING] button on the remote control unit

vThe Dubbing screen appears.

.

2Select “DISChDISC”, and press the [OK] button v A menu screen for copying the entire disc appears.

Memo:

v During copy of the entire disc, data is temporarily copied to the internal HDD.

v Only discs that are not copyright-protected can be copied.3Set the number of discs to copy using the [ J / K ] buttonsvYou can specify up to a maximum of 10 discs.

̌ ̍

2

.

4Select “NEXT”, and press the [OK] button v The disc tray will open automatically.

5 Set the source BD or DVD on the disc tray

6Select “START”, and press the [OK] button

.

vThe disc tray will close automatically. The source BD or DVD will be recognized, and copying to the internal HDD will proceed.

vThe disc tray will open automatically after copying has finished and “READY TO COPY NOW. INSERT THE DISC FOR COPYING” will be displayed on the monitor.

Memo:

vConfirm the insufficient space on the internal HDD when the copy interrupts.7Set a BD or DVD to copy on the disc tray

8Select “START”, and press the [OK] button

.

vThe disc tray will close automatically. BD or DVD will be recognized, and the contents that were copied to the HDD will be copied to the disc.

Memo:

vThe copy operation will not be performed when the remaining disc memory is not sufficient.

46