Dubbing/Importing

Importing Data from a USB- compatible Device to the

HDD

Data on devices connected to the USB terminal can be imported to the HDD as follows.

vFile formats that can be imported

AVCHD, SD-VIDEO(JVC Everio MPEG2 TS, PS), MOV*, and JPEG

MOV* : MOV files that are taken in SP mode using the JVC ProHD Camcorder GY-HM700/100

Memo:

vTitles that are imported using “FULL IMPORT” combined into one title. This unit does not support combining of titles during the editing operation after import is complete. To combine and import data, select “FULL IMPORT”.

vFor data that is selected for import via “SEL. TITLE(VIDEO)”, titles with the same date are combined.

vTitles of two or more scenes cannot be combined if the recording criteria, such as video size, are different.

vImport of MOV files recorded using JVC GY-HM700/100 SP mode 1080i (25 Mbps) requires a duration that is about 1.3 times longer than the usual time.

Note:

vTurn off the power for this unit and the connecting device if an USB compatible device is to be connected to this unit.

vDo not unplug the USB cable while importing a title. Doing so may result in loss or damage of the titles.

vOnly titles that are not copyright-protected can be imported.

vFor MOV format videos, only videos in MOV format (SP mode) taken using JVC ProHD camcorder GY-HM700/100 are compatible. There is no guarantee for importing videos taken on devices by other company.

In addition, MOV videos cannot be imported using the SR- HD1250.

vRecognizing the device and importing the files may take a long time depending on the amount of files in the USB device.

vIf a USB connection is used, this unit will only recognize one device out of all the recording devices.

Depending on the video camera, the memory card slot will be recognized but the internal device will not be recognized. Use the following methods to solve this.

v If the internal device is not recognized:Copy the data from the camera’s internal memory or HDD onto the SD card.vIf using a JVC camcorder that has two memory card slots:Put the memory card that has the required data in slot A.

v If the target device is not recognized using the USB connection, use the camcorder's burner or a similar device to dub the disc before proceeding with dubbing on this unit. For more details, refer to “Importing Data from a BD/DVD to the HDD” (A page 30) .

vWhen importing videos from a USB-connected camcorder, data reading from the internal memory of the camcorder may fail. If both the camcorder’s internal memory and SD card are available, the SD card may be detected first. To prevent this from occurring, remove the SD card before reading data from the internal memory.

mPreparations

1Connect the USB device (Everio, etc.) to this unit using a USB cable

HDD

REC

BV

REC

SD

REC

INPUT

MIDIA SELECT

ONE TOUCH

MODE

SELECT

HDD

BD/SD

DUBBING

HDV/DV IN

.

Memo:

vAfter connecting the USB cable, turn on the camera and switch the mode of the camera.

(Choose "Connect to a computer" or a similar option. For details refer to the camera’s instruction manual.)

v“USB RDY” appears on the display window of the unit when an USB device is recognized.

2Press the [DUBBING] button on the remote control unit

vThe importing screen appears.

.

3Select “USBhHDD” in the importing screen, and press the [OK] buttonvA check mark is added to the “USBhHDD” item.4 Select “NEXT”, and press the [OK] buttonvThe import selection screen appears.Full import1Select “FULL IMPORT” in the import selection screen, and press the [OK] buttonvA check mark is added to the “FULL IMPORT” item.2 Select “START”, and press the [OK] button

.

33