Dubbing/Importing

Dubbing a Title from the HDD to a BD/DVD

Titles stored in the internal HDD can be dubbed to a BD/DVD as follows.

Memo:

vDisc types that can be used for dubbing with this unit are: BD-RE, BD-R, DVD-RW, and DVD-R.

For more details, refer to “Discs that enable both dubbing and playback” (A page 10) .

vHD content for which the delete scene operation has been applied cannot be dubbed to BDMV. Perform seamless conversion before starting a dubbing operation.

For details, refer to “Mode conversion” (A page 73) .

Note:

vThe following high bit-rate files may not meet the Blu-ray Disc standards when they are dubbed to a BD.

vWhen a BDAV/BDMV disc is created (high-speed dubbing) by importing content captured in the JVC GY- HM700/100 SP mode.

vWhen a BDAV disc is created (high-speed dubbing) by importing content captured in the JVC GZ-HD7/6 etc FHD mode.

vWhen a BDAV/BDMV disc is created by importing content that is captured using another video camera at a peak bit-rate that exceeds 28.8 Mbps.

v If the Blu-ray Disc standards are not met, playback on another player may fail. To ensure that the standards are satisfied, perform high-speed dubbing after converting the recording mode, or perform dubbing by specifying a recording mode.

3On this screen, select “DISCiVIDEO”

.

vA check mark is added to the “DISCiVIDEO” item.

4Select “NEXT”, and press the [OK] button

Memo:

v Dubbing can also be performed from the Playback Navigation screen.

①Select the titles to dub, and press the [OPTION] button

②Select “DUB”, and press the [OK] button

③ Follow Steps 3 to 4 of "Preparation"

mDubbing titles

1Select “RECORDING FORMAT”, and press the [OK] button

Dubbing from the HDD to a BD/DVD

mPreparation

1Set a BD or DVD on the disc tray

Memo:

v A message appears on the monitor in the following cases where a disc cannot be written to. Take the necessary actions according to the message.

v When an incompatible disc type is setvWhen there is insufficient space on the set discvWhen a finalized disc is set

2Press the [DUBBING] button on the remote control unit

vThe Dubbing menu screen appears.

.

vChoose a format.For more details, refer to “Format chart” (A page 25) .

2Select “RECORDING MODE”, and press the [OK] button

.

vSelect “HIGH-SPEED DUBBING” or a recording mode of your preference.

39