JVC 1010MTH-SW-MT, LST1083-001C, SR-HD1250US, SR-HD1500US Importing Data from an i.LINK-compatibleDevice to the HDD (Continued), Cancel dubbing, Dubbing/Importing, Imports data from current position, Memo:, Memo:

Dubbing/Importing

Importing Data from an i.LINK-compatible Device to the HDD (Continued)

vSelect “XP”, “SP”, “LP”, or “EP” from the “RECORDING MODE” option.

.

Memo:

vHDV contents will be imported in DR mode.

For more details, refer to “Recording Modes” (A page 28) .

4Select “START”, and press the [OK] button v Importing of the titles starts.

vAfter titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor.

.

Imports data from current position

You can import videos from the current tape position till the end as follows.

1Select “IMPORT FROM CURRENT POSITION”, and press the [OK] button

vA check mark is added to the “IMPORT FROM CURRENT POSITION” item.

2Select “NEXT”, and press the [OK] button

.

vA recording mode selection screen appears.

3Select “RECORDING MODE” and press the [OK] button to display the pop-up menu

vSelect “XP”, “SP”, “LP”, or “EP” from the “RECORDING MODE” option.

.

Memo:

vHDV contents will be imported in DR mode.

For more details, refer to “Recording Modes” (A page 28) .

4Select “START”, and press the [OK] button v Importing of the titles starts.

vAfter titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor.

.

Cancel dubbing

mTo cancel importing before it starts

vSelect “CANCEL” from the menu, and press the [OK] button to cancel importing of a title.

vAlternatively, you can press the [RETURN] button to cancel importing and return to the initial screen.

mTo cancel importing while it is in progress

vPress the [OPTION] button. Select “CANCEL” from the Cancel Importing menu, and press the [OK] button. Doing so imports data to the HDD up to the position where you have chosen to stop.

38