JVC 1010MTH-SW-MT, LST1083-001C, SR-HD1250US, SR-HD1500US Audio, mDOWN MIX, mDIGITAL OUT, Settings Menu, mDYNAMIC RANGE CONTROL

Settings Menu

vDISC RECORDING AUDIO

For changing the settings of audio to be recorded to the disc when in the AF, AN, AE or AL mode.

Setting	Description
Values
AUTO	Records “Stereo”, “Surround” or “Dual
	broadcast” audio sounds as they are.
FIXED	Records “Stereo” and “Surround” sounds in
	“Stereo”. “Dual broadcast” audio sounds are
	recorded as they are.

Memo:

vSurround sounds of a title become stereo sounds when re- encode dubbing is performed.

Audio

.

mDYNAMIC RANGE CONTROL

For setting the dynamic range compression ratio (ratio between the maximum and minimum volume) during Dolby Digital playback.

Setting Values	Description
AUTO	Perform compression only for Dolby
	TrueHD.
OFF	Not compressed.
ON	Perform maximum compression.

Memo:

vSetting to “OFF” may produce the same effects as the “ON” mode for some discs.

vPerforming compression allows even the slightest sound to be heard clearly.

vThere may be differences in the effect depending on the disc used.

mDOWN MIX

For setting whether to output analog audio.

Setting Values	Description
STEREO	Use this setting when connecting an
	audio amplifier or TV.
DOLBY	Use this setting when connecting an
SURROUND	amplifier that supports Dolby
	Surround.

mDIGITAL OUT

Set this item according to the device connected to the digital audio output terminal (optical digital).

vPCM DOWN SAMPLING

For specifying settings on sampling frequency conversion.

Setting	Description
Values
OFF	Sampling frequency is not converted.
ON	Audio recorded at a sampling frequency of
	96 kHz or 88.2 kHz is converted to 48 kHz
	and 44.1 kHz respectively.

Memo:

vSetting to “OFF” may produce the same effects as the “ON” mode for some discs.

vDolby Digital

For setting audio output to “BITSTREAM” or “PCM”.

	Setting Values	Description
	BITSTREAM	Use this setting when connecting a
		device that is able to decode “Dolby
		Digital”.
	PCM	Audio input will be changed and output as
		“PCM”.
		Use this setting when connecting a
		device that is unable to decode “Dolby
		Digital”.
v	Dolby Digital Plus/TrueHD
For setting audio output to “BITSTREAM” or “PCM”.
	Setting	Description
	Values
	BITSTREAM	Use this setting when connecting a
		device that is able to decode “Dolby
		Digital Plus/TrueHD”.
	PCM	Audio input will be changed and output as
		“PCM”.
		Use this setting when connecting a
		device that is unable to decode “Dolby
		Digital Plus/TrueHD”.
v	DTS
For setting audio output to “BITSTREAM” or “PCM”.
	Setting Values	Description
	BITSTREAM	Use this setting when connecting a
		device that is able to decode “DTS”.
	PCM	Audio input will be changed and output as
		“PCM”.
		Use this setting when connecting a
		device that is unable to decode “DTS”.

78