—6—
Page 6 December 26, 2003 2:23 pm
Remote
*does not function with this VCR.
On-screen display
If you press OSD (OK) on the Remote when “ON SCREEN (REC)
and ON SCREEN (PLAY)” are set to “ON” (墌pg. 18), you can see
the current VCR status on the TV screen.
The indications are not recorded even if the VCR is in the
recording mode.
SEP function is available eventhough there is only indication of
SP/EP on the Remote.
The glow-in-the-dark buttons shown in white on the illustration
above are helpful when using the Remote in darkened rooms.
Buttons with a small dot on the left side of the name can also be
used to operate your TV while holding down TV on the Remote.
Number keys

To recall an indication

APress OSD (OK).
●All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE (if in the Record Pause
mode), remain on the TV screen.
BPress OSD (OK) again to clear the display.
●The RECORD/PAUSE indication remains on the TV screen.
Channel and
auxiliary input
Day and
clock time
STEREO
program
indication
SAP
indication
Audio
monitor
indications
VCR operation
mode
Tape speed
Cassette mark
Tape position
Index number
Timer warning display
Time counter
Tape
remaining time
SR-V101US.fm Page 6 Friday, December 26, 2003 2:24 PM