JVC SR-V101US manual Initial Settings, Clock Setting, Preparations

Initial Settings

Clock Setting

Turn on the VCR and TV, and select the VCR channel (or AV mode).

Perform clock setting only if the clock has not been set correctly by the Plug&Play setting.

ESelect D.S.T. mode

Press OK or SHUTTLE PLUS e to move the highlight bar to “D.S.T.”, then press SHUTTLE PLUS rtrepeatedly until the desired setting is selected.

AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.) Be sure to select the correct time zone manually in step 6.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

FSelect time zone

Press OK or SHUTTLE PLUS e to move the highlight bar to “TIME ZONE”, then press SHUTTLE PLUS rt repeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as follows:

{AUTO {ATLANTIC {EASTERN {CENTRAL

{MOUNTAIN {PACIFIC {ALASKA {HAWAII

{(back to the beginning)

GComplete Semiauto Clock Set

Press MENU to return to normal screen.

IMPORTANT

Preparations

AAccess Main Menu screen, then Initial

Set screen

Press MENU on the Remote. Press SHUTTLE PLUS rt to move the highlight bar (arrow) to “INITIAL SET”, then press OK or SHUTTLE PLUS e.

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS ( , ), THEN (OK)

PRESS (MENU) TO END

Turn off the VCR. “Auto” will appear on the display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.

Setting clock manually

— Manual Clock Set

First follow steps 1 to 2 in “Preparations” previously described,

B Access Clock Set screen	INITIAL SET
Press SHUTTLE PLUS rtto move the
	CLOCK SET
highlight bar (arrow) to “CLOCK SET”,	GUIDE CHANNEL SET
then press OK or SHUTTLE PLUS e.
	SELECT WITH ( , ) AND (OK)
	PRESS (MENU) TO END

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps 1 to 2 in “Preparations” above, then go to the following steps.

C Set Auto Clock to ON	CLOCK SET
Press OK or SHUTTLE PLUS eon the	TIME	DATE	YEAR
Remote repeatedly to move the highlight	– –:– – AM	1/ 1	04
	AUTO CLOCK : ON		(CATV)
bar to “AUTO CLOCK”, then press	HOST CH	: AUTO
	D.S.T.	: AUTO
SHUTTLE PLUS rtso that “ON” is	TIME ZONE	: AUTO
	PRESS ( ,	), THEN (OK)
selected.
	PRESS (MENU) TO END

●The time set previously will be erased

when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

DSelect host channel

You can either select “AUTO” or enter a PBS channel number. Press OK or SHUTTLE PLUS eto move the highlight bar to “HOST CH”, then press SHUTTLE PLUS rt repeatedly until “AUTO” or the desired PBS channel number is selected.

●Some PBS channels do not transmit clock setting data.

then go to the following steps.

C Set time, date and year

Press SHUTTLE PLUS rtuntil the desired time appears, then press OK or SHUTTLE PLUS e. Set the date and year in the same way.

● Holding SHUTTLE PLUS rtchanges the time in 30-minute intervals, or changes the date in 15-day intervals.

D Select D.S.T. mode

Press OK or SHUTTLE PLUS e to move the highlight bar to “D.S.T.”, then press SHUTTLE PLUS rtto select the desired setting.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

EStart clock

Press MENU and normal screen appears.

To make corrections any time during the process

Press OK or SHUTTLE PLUS e repeatedly until the item you want to change blinks, then press SHUTTLE PLUS rt.

— 8 —