EN 17
| 5 Enter cable box brand |
|
| ||
Press %fi to move | FUNCTION SET UP | TUNER SET UP INITIAL SET UP | ||
the arrow to | CABLE SET UP |
| ||
|
|
| ||
| “BRAND”. | INPUT CH | OFF | ||
BRAND | 1 | |||
| Press @ # to enter the | ||||
TEST MODE |
| |||
| brand code from the |
|
|
| |
| list shown to the | MENU | OK | SELECT WITH ARROW KEYS | |
| right. | EXIT | SELECT | THEN PRESS [OK] | |
| ||||
|
|
| ||
NOTE:
If you do not engage the test mode in step 6, “INPUT CH” and “BRAND” are not set.
| ● If the cable box’s | FUNCTION SET UP TUNER SET UP INITIAL SET UP | ||
| channel changes | CABLE SET UP |
| |
| INPUT CH | OFF | |
| to 9, setting is |
| ||
| BRAND | 1 | |
| complete |
| DID YOUR CABLE BOX CHANGE TO | |
| TEST MODE CHANNEL 09? | ||
| Press @ # to move |
| YES | NO |
|
|
| |
the arrow to | MENU | OK | SELECT WITH ARROW KEYS |
| “YES”, then press | EXIT | SELECT | THEN PRESS [OK] |
| |||
|
|
| |
3 Repeat step 5 until the cable box’s channel changes to 9 by entering another code.
4 If the channel does not change after going through all the code numbers listed for your model of cable box, then try all the other numbers.
7Return to normal screenPress MENU.
If the VCR’s clock has not been set (with AUTO CLOCK set to ON)“CABLE BOX USERS SET CLOCK MANUALLY” appears for about 5 seconds when you press OK in step 3, then the Clock Set screen appears.
Perform Manual Clock Set on page 12. If you press MENU after the clock has been set, the Cable Box Input Channel screen in step 4 appears.
| BRAND | CODE |
|
|
| ARCHER | 1, 5, 17 |
| CABLETENNA | 1, 17 |
| CABLEVIEW | 15, 16, 17, 21, 25 |
| CITIZEN | 15, 16, 17, 21, 25 |
| CURTIS | 2, 8 |
| DIAMOND | 1, 17 |
| GC BRAND | 15, 16, 17, 21, 25 |
| GEMINI | 15 |
| GENERAL INSTRUMENTS | 1, 4, 6, 11, 12, 15, 28 |
| HAMLIN | 10, 18, 23 |
| JASCO | 15 |
| JERROLD | 1, 4, 6, 11, 12, 15, 28 |
| NOVAVISION | 2, 8 |
| OAK | 7, 20 |
| PANASONIC | 13, 14 |
| PULSER | 15, 16, 17, 21, 25 |
| RCA | 13, 14 |
| REGAL | 10, 18, 23 |
| REMBRANDT | 1, 16, 17 |
| SAMSUNG | 5, 16, 24 |
| SCIENTIFIC ATLANTA | 2, 8 |
| SIGMA | 7, 20 |
| SL MARX | 5, 16, 17, 24, 25 |
| SPRUCER | 13, 14 |
| STARGATE | 5, 15, 16, 17, 21, 24, 25 |
| TELEVIEW | 5, 16, 24 |
| TOCOM | 1, 4, 16 |
| UNIKA | 1, 17 |
| UNIVERSAL | 16, 17, 25 |
| VIDEOWAY | 3, 9, 22 |
| ZENITH | 3, 9, 22 |
|
|
NOTES:
●The Controller may not work with all types of cable box.●If your cable box does not respond to any code, you cannot use the Controller to change cable box channels. In this case, make sure to leave the cable box turned on and tuned to the proper channel before the scheduled start time of timer recording.
Contact your cable company about the possibility of exchanging your current cable box with the one compatible with your VCR.
●The VCR can only change the cable box channel through the Controller during timer recording.
●If your cable box cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the cable box turned on and tuned to the proper channel before the scheduled start time of timer recording.
●If the VCR’s memory backup expires because of a power failure, set the cable box input channel and brand again.
●For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at