Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC SR-VD400U 70 EN, TV, Hold, down, ENTER, ENTER, TV/VCR, Number, Number, 23- 1,3, TV VOL +/–, BRAND CODE, Number keys, 4Operate TV, TV BRAND NAME, 1 Turn on the TV

1 92

Download 92 pages, 2.47 Mb

70 EN

MULTI-BRAND REMOTE CONTROL

TV Brand

Setting

23- 1,3

4

VCR CABLE	TV/VCR
TV /DBS

4

3- 24

Number keys

ENTER

3- 3

TV VOL +/–

When programed (set) with a manufacturer’s (brand’s) code, this Remote can perform some of the remote control functions of the listed TVs. You can control a JVC TV without setting a brand code.

1 Turn on the TVTurn on the TV using the Power button on the TV or its Remote.2 Set remote operation modeSet the VCR/TV/CABLE/DBS selector to “TV”.3 Set TV brand codeFollow the example shown below.1Press and hold POWER.

2 Press the Number keys to enter your TV’s brand code by referring to the table below.

3Press STOP ( 7 ), and release POWER.

●Once you have set the Remote to operate a TV, you do not have to set it again until you replace the Remote’s batteries.

●JVC and PANASONIC have two codes. If the TV does not function with one code, try entering the other.

4Operate TVPress one of the following buttons: POWER, TV/VCR, TV/VCR CH +/–, (TV Muting), TV VOL +/–, and Number keys.

●For some brands, you must press ENTER after having pressed the Number keys to enter a channel number.

●To operate the VCR, set the VCR/TV/CABLE/ DBS selector back to “VCR”.

TV BRAND NAME	BRAND CODE
JVC	01, 03
HITACHI	10
MAGNAVOX	02
MITSUBISHI	03
PANASONIC	04, 11
RCA	05
SHARP	06
SONY	07
SAMSUNG	12
SANYO	13
SEARS	13
TOSHIBA	08
ZENITH	09

NOTES:

●Depending on the type of TV, some or all functions cannot be operated using this Remote.

●It is impossible to control a TV that does not have a remote sensor.

(Ex.) To set Remote to RCA 05:

POWER	AUX	STOP
		JKL

	Hold	Press in succession	Release
	down

Contents

D-VHSDIGITAL RECORDER INSTRUCTIONS 2 EN IMPORTANT PRODUCT SAFETY INSTRUCTIONS 1. Grounding or Polarization Your product may be equipped with a 2. Power Sources 3. Overloading 4 EN 1.DO NOTplace the VCR… …in an environment prone to extreme temperatures or humidity …in direct sunlight …in a dusty environment …in an environment where strong magnetic fields are generated 6 EN Basic Connection 8 EN Auto Clock Set/Auto Tuner Set ATTENTION ●It takes several minutes for the VCR to complete the Plug & Play setting 1 Perform Plug & Play setup Connect the antenna cable to the VCR 10 EN Preparations Setting clock semiautomatically 12 EN Setting clock manually Setting channels automatically 14 EN Setting channels manually Cable box Suggested location Your VCR Cable box Controller RF output Audio/video (supplied) 16 EN 5 Enter cable box brand “BRAND” Press @ # to enter the brand code from the list shown to the 18 EN Setting DBS receiver input channel & brand 1Turn on DBS receiver Select a channel other than channel 205 on your DBS receiver 2 Access Main Menu screen on VCR Access DBS Receiver Set screen 20 EN STOP/EJECT POWER 1 (7/0) REW () FF () REW(1) FF(¡) STOP/EJECT To rewind the tape (when it is not running) Press REW ( 1 ) REW To fast-forward(when it is not running) 22 EN A Checking tape position C Adjusting tracking condition D Selecting monitor sound 24 EN E Automatic operations after rewinding F Locating beginning of recordings How to read the Video Navigation screen for D-Theatertape NAVI Title Section OSD 26 EN D-VHSRecording S-VHS/VHSRecording 28 EN A Changing display information B Specifying recording length C Watching one program while recording another D Showing on-screendisplay 30 EN A Locating particular scene rapidly 32 EN B Viewing still picture D Viewing slow motion picture 34 EN 4Input receiving channel number The guide channel Press @ # to move the arrow to “CONFIRM”, then press OK 8Engage timer recording standby mode Press TIMER (‰) 36 EN 2Access Guide Channel Set screen 3Input guide channel number 4 Input receiving channel number 5Return to normal screen 38 EN 8 Set recording speed 9 Return to normal screen 0Engage timer recording standby mode To timer-recorddaily or weekly serials Press DAILY (number “8”) or WEEKLY (number “9”) anytime during steps 4 through 40 EN A Checking program settings Pattern 1: Pattern 2: Pattern 3: Other Useful functions for timer recording ●Auto Timer ( pg. 59) 42 EN 3Input password number Press the 5-digit Namber keys to input the password number, then press OK Namber 44 EN A Deactivating Video Navigation 46 EN A Finding by tape number B Finding by program title C Finding by category 48 EN D Finding by recording date E Finding blank space 50 EN A Editing tape title 5 Access edit screen Press @ # to move the arrow to “EDIT”, then press OK How to enter the characters and symbols with the number keys on the Remote Press the Number keys, then press > to enter each character Refer to the example below 52 EN Entering or Editing program Editing program category title D Deleting tape information 54 EN E Deleting program information F Checking memory 2Access Function Set Up screen 3Select Function Menu 4Select Function 5ChangePress @ #.setting 6Return to normal screen 56 EN Video settings [VIDEO FUNCTION] Audio settings [AUDIO FUNCTION] 58 EN Additional settings [ADDITIONAL] 60 EN S-VHSET to “ON” ●Before recording, make sure that “V. CALIBRATION” is set to “ON” ( pg. 56) ●You cannot activate the S-VHSET function –while recording is in progress 62 EN i.LINK set up for connected device What is “i.LINK” i.LINK Connection i.LINK Branched Connection i.LINK Connection Examples 64 EN Select JLIP ID Set Up screen JLIP ID Number Setting To change the JLIP ID number of this VCR, follow the procedure below 3Set JLIP ID Number “JLIP ID” desired ID number 66 EN 1 Make connections A Connection with the camcorder BConnection with the VCR Insert the cassette to be recorded on into this VCR (for recording) 3Select input location on this VCR 68 EN When using this VCR as the recording VCR, connect this VCR’s If another VCR does not have S-videoinput/output connectors, use a video cable 3 Select input location on this VCR Press CHANNEL +/– Press the Number key “0 (AUX)” or 70 EN 3- 1,3 Number keys CABLE BOX BRAND NAME 1 Turn on the cable box Turn on the cable box using the Power button on the cable box or its Remote 72 EN 1 Set remote operation mode Set the VCR/TV/CABLE/DBS selector to “VCR” 2 Set remote control code for Remote 1 Press and hold A/B/C/D A/B/C/D 74 EN RECORDING TIMER RECORDING TIMER 76 EN VIDEO NAVIGATION 78 EN Playback of tapes recorded in D-VHSmode It takes a moment after you press Searching images on D-VHStapes •The images appear frame by frame •Block noise may appears on the bottom half of images 80 EN Questions and answers PLAYBACK Q. What happens if the tape reaches its end during playback or search A. The VCR automatically rewinds it to the beginning Q.Can the VCR indefinitely remain in still mode 82 EN List of terms Front panel 1 S-VIDEO/VIDEO/AUDIOinput connectors (F-1) 8 PLAY ( 3 ) button : pg : pg 9 CHANNEL + and – buttons : pg. 23, 26 Rear panel 1 AC power cord : pg 2 Cooling fan 3 JLIP terminal : pg 4 Component video output connectors : pg 86 EN Front display panel 1 Channel and auxiliary input (“L-1”, “L-2”, “F-1” 5 D-Theaterindicator : pg and “I-1”etc.) On-screendisplay 1 Cassette indication 2 Cassette type indication : pg 3 Index no. indication : pg 4 VCR operation mode indication 88 EN Remote 1 A/B/C/D button : pg 2 VCR/TV/CABLE/DBS selector : pg. 70 – 3 OK Button VIDEO/AUDIO (D-VHS) GENERAL VIDEO/AUDIO (S-VHS/VHS) TUNER 90 EN LIMITED WARRANTY ATTENTION THE i.LINK/DV CONNECTION OF THIS PRODUCT CONFORMS TO VD400U-SR