JVC SR-VD400U 68 EN, OUT, OUT, VCRs, S-VHS, S-VHS, S-VHS, Input, Input, only), Input, Input, cable, output, editing, To EDIT, S-video, To AUDIO, To Audio, To AUDIO

68 EN EDITING (cont.)

S-VIDEO/ VIDEO Connections

Various connection for editing tapesThe following three methods can be used for editing tapes.

●VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●S-VHS to VHS editing (VIDEO-VIDEO connection): Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●S-VHS to S-VHS editing (S-VIDEO connection): Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs.

AYou can use a camcorder as the playback device and your VCR as the recording VCR.

This VCR (for recording)

IN F-1

+

To AUDIO	To rear panel
Input
	REMOTE PAUSE/
	AV COMPULINK

Audio cableconnector (supplied)

To S-VIDEO	Mini-plug cable
	(not supplied)
Input
	(JVC camcorder
S-video cable	only)
(supplied)
To Audio output

To EDIT

To S-video	Camcorder
output
	(for playback)

BYou can use your VCR as the playback or recording VCR.

Ex. When using this VCR as the recording VCR

This VCR (for recording)

				COMPONENT		VHF/UHF
				VIDEO OUT		ANTENNA
		Y	PB/CB	PR/CR		IN
		OUT			IN		i.LINK IN/OUT
							DV IN
		S VIDEO		IN(L-1)	S VIDEO		S400
CABLE BOX						ANTENNA	DIGITAL OUT
REMOTE PAUSE/	R AUDIO L	VIDEO		AUDIO L	VIDEO	OUT	OPTICAL
			R				PCM/DOLBY DIGITAL
AV COMPULINK
							D THEATER
							REGION 1

	To Audio	To S-video
	Input	Input
	Audio cable	S-video
	(supplied)	cable
		(supplied)
To AUDIO	To S VIDEO
OUT		OUT

Another VCR (for playback)

1 Make connections

A Connection with the camcorder

Connect an audio/S-video cable between the camcorder’s audio/S-video output connectors and your VCR’s audio/S-video input connectors.

● When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated on the left.

● When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR.

NOTE:

If the camcorder does not have S-video output connector, use a video cable.