JVC SR-VD400U Audio settings [AUDIO FUNCTION], OFF, bold, AUDIO1, AUDIO2, 1+2MIX, AUDIO1, STREAM, Dolby D, 2CH-PCM, STANDARD, This VCR, STANDARD:, new formats, PCM&STANDARD

EN 57

Audio settings [AUDIO FUNCTION]

* The default setting is bold in the table below.

 STD AUDIO REC MODE	You can select the audio format when you record a program or
STANDARD	analog signal from connected devices in STD mode. When this
	function is set to “PCM&STANDARD”, you can obtain high-quality audio sound.
PCM&STANDARD
	STANDARD:	Select this when the picture quality is important
		and when you record in MP2 format.
	PCM&STANDARD: Select this when the sound quality is important.
		When you record the analog signals or DV signals
		from the camcorder in STD mode, PCM audio is
		also recorded in addition to MP2 audio. In HS
		mode, PCM audio is automatically recorded.
 DV AUDIO REC	Up to four audio signal channels can be input from a DV camcorder
AUDIO1	through the DV IN connector (i.LINK). This VCR allows you to select
AUDIO2	and record two of these channels. This setting is used to specify which
1+2MIX	two channels to record.
	When there are four DV audio channels (32kHz):
	AUDIO1: Records the two channels (L/R) of DV AUDIO 1.
	AUDIO2: Records the two channels (L/R) of DV AUDIO 2.
	1+2MIX: Mixes and records both DV AUDIO 1 and 2.
	When there are two DV audio channels (48kHz):
	Because there are only two channels, those two channels are recorded
	regardless of the DV sound setting.
 OPTICAL OUT	This VCR can send the Dolby Digital bitstream or PCM Audio to external devices.
Dolby D	When you play back a tape including the Dolby Digital bitstream, and if you have
2CH-PCM	a device equipped with Dolby Digital decoder, set this function to “Dolby D”.
STREAM	If not, set this function to “2CH-PCM”.
	“STREAM” will be used when playing back and receiving a audio signals in other
	new formats.
		This VCR
				COMPONENT		VHF/UHF
				VIDEO OUT		ANTENNA
		Y	PB/CB	PR/CR		IN
		OUT			IN		i.LINK IN/OUT
							DV IN
		S VIDEO		IN(L-1)	S VIDEO		S400
		CABLE BOX				ANTENNA	DIGITAL OUT
		REMOTE PAUSE/R AUDIO L VIDEO		AUDIO L	VIDEO	OUT	OPTICAL
			R				PCM/DOLBY DIGITAL
		AV COMPULINK
							D THEATER
				IN(L-2)			REGION 1

Amplifier equipped with Dolby Digital decoder

Note for connection: Remove the protection cap from the cable.

2ND AUDIO REC

ON

OFF

When this function is set to “ON”;

●If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks. The main audio is not recorded.

●If a non-SAP program is received, the main audio is recorded on boththe Hi-Fi and normal tracks.When this function is set to “OFF”, the SAP audio cannot be recorded.

CONTINUED ON NEXT PAGE \