22 EN

BASIC PLAYBACK AND RECORDING (cont.)

Basic

A Checking tape position

Playback

Features

● Turn on the VCR and the TV, and select the AV

The tape position indicator appears on the screen in the following cases:

●When you change the VCR operation mode from the stop mode to fast forward or rewind mode.

●When you perform an Index Search ( pg. 24).

B E

mode on the TV.

● Set the VCR/TV/CABLE/DBS selector on the

Remote to “VCR”.

B

IN F-1

+

The position of “ ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.

NOTES:

●“SUPERIMPOSE” must be set to “ON”, or the indicator will not appear ( pg. 59).

●It may take a few seconds for the tape position indicator to be displayed.

To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.

VCR CABLE TV /DBS

 

 

B

Playing back tape repeatedly

C

 

 

 

— Repeat Playback

 

 

You can play back a tape repeatedly (50 times).

 

 

While playing back a tape, press and hold PLAY ( 3 )

 

 

for more than 5 seconds.

 

 

The play indicator ( # ) on the front display panel starts

 

 

flashing slowly, and a tape will be played back 50 times.

 

 

To stop playback, press STOP ( 7 ) on the Remote or

 

 

STOP/EJECT ( 7/0 ) on the front panel.

C

NOTE:

 

For a cassette recorded in D-VHS mode, Repeat Playback is not

 

possible if the cassette was recorded in LS3 or LS5 mode.

B

D