11
Basic Connections
Aerial connector
Back of TVTV aerial cable
RF cable | ||
cable | ||
(provided) | ||
(not provided) | ||
| ||
AV1 | Mains power cord | |
IN/OUT | ||
|
ANTENNA ANTENNA
IN OUT
Mains outlet
ATTENTION:Your TV must have a
It’s essential that your video recorder be properly connected.
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
A Situate the recorder.Place the recorder on a stable, horizontal surface.
B Connect the recorder to TV.ADisconnect the TV aerial cable from the TV.
BConnect the TV aerial cable to the ANTENNA IN connector on the rear panel of the recorder.
CConnect the provided RF cable between the ANTENNA OUT connector on the rear panel of the recorder and the TV’s aerial connector.
DConnect the
recorder and the TV’s
●The AV1
●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.
●For switching the TV’s mode, refer to the instruction manual of your television.
●To obtain
Plug the end of the mains power cord into a mains outlet.
After the connection is completed, perform “Auto Set Up” on page 13.