JVC SR-VS30EK SAT CONTROL SET (cont.), Setting satellite receiver's brand and channel, C Access the Initial Set screen, A Turn on the satellite receiver

18 SAT CONTROL SET (cont.)

1

2

1 2 3

4 5 6

7 8 9

0

1

2

3

4

4

3

Setting satellite receiver's brand and channel

After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly.

Turn on the TV and select the AV mode.

A Turn on the satellite receiver.

Turn on the satellite receiver’s power.

B Access the Main Menu screen on the recorder.

Press MENU.

C Access the Initial Set screen.

Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e.

D Access the Sat Control Set screen.

Press rt to move the highlight bar (pointer) to “SAT CONTROL SET”, then press OK or e.

E Enter the satellite receiver’s brand.

Press the appropriate number keys to enter the brand code from the list on page 19, then press OK.

●If the brand code you entered is invalid, the code field will be reset. Enter the correct

brand code again.

● If the recorder is in playback or

recording mode, you cannot set the brand code.