70 | SUBSIDIARY SETTINGS (cont.) |
VHS MODE SET (cont.)
* The default setting is bold in the table below.
8 DIGITAL TBC/NR | Your recorder is equipped with the Digital TBC (Time Base Corrector) that removes |
ON | jitter from fluctuating video signals to deliver a stable picture even with old tapes |
OFF | and rental cassettes. |
| The on/off of Digital |
| picture reproduction is also linked to this function. |
| We recommend that you set “DIGITAL TBC/NR” to “ON” when ... |
| ... playing back a tape recorded on a camcorder. |
| ... playing back a tape repeatedly used. |
| ... using this video recorder as the source player for editing. |
| NOTES: |
| ● If you play back a tape recorded under poor TV reception condition, the picture may |
| become more stable with Digital TBC/NR set to off. |
| ● When “DIGITAL TBC/NR” is set to “ON”, if you play back a tape where certain types of |
| signals are recorded (using a PC or some character generators), the playback picture may |
| be distorted. If this is the case, set “DIGITAL TBC/NR” to “OFF”. |
| ● When playing back a MESECAM tape, Digital TBC/NR does not function even though |
| “DIGITAL TBC/NR” is set to “ON”. |
|
|
8 VIDEO STABILIZER | When this function is set to “ON”, you can automatically correct vertical vibration |
ON | in the picture when playing back unstable recordings made on another recorder. |
OFF | NOTES: |
| |
| ● When you finish viewing a tape, be sure to set this function to “OFF”. |
| ● Regardless of the setting, this function has no effect during recording and during special effects |
| playback. |
| ● The |
| ● To watch recordings with |
| ● Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate Digital |
| TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be automatically |
| turned “OFF”. |