JVC SR-VS30EK Player, Player, Player, Player, Recorder, Another recorder

							51
A				B
	TV receiver						TV receiver
	(AV mode)	Player	Your recorder		Recorder	Your recorder		(AV mode)

		21-pin SCART cable	21-pin SCART cable	21-pin SCART cable
		(not provided)	(not provided)
				(not provided)
21-pin SCART cable
(not provided)
		Another recorder	Another recorder
	Recorder		Player
C-a			C-b
TV receiver					TV receiver
(AV mode)	Recorder	Your recorder	Player	Your recorder	(AV mode)

	21-pin SCART cable	21-pin SCART cable
S-Video cable	(not provided)	(not provided)	21-pin SCART cable
			(not provided)
(not provided)
Audio cable
(not provided)
	Another recorder	Another recorder
Player		Recorder

NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you select “EDIT” to dub tapes in step 4, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

●When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting ( pg. 67).

●If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder’s S-VIDEO and AUDIO input/output connectors.

When using your recorder as the source player ...

... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck’s S-Video and Audio input connectors. When using your recorder as the recording deck ...

... connect its front panel S-VIDEO and AUDIO input connectors to the source player’s S-Video and Audio output connectors. Then, set the recorder’s input mode to “F-1”, and set “VHS F-1 INPUT” to “S-VIDEO” ( pg. 53).