46 | EDITING (cont.) |
Normal Dubbing
(from DV to VHS)
1 | 3 | 2 |
1
2
1 | 2 | 3 |
|
4 | 5 | 6 | 3 |
7 | 8 | 9 | 4 |
|
|
| 4 |
0
1 | 3 |
2 |
|
NOTES:
●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy. It is recommended to conduct a test with unimportant cassettes first.
●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing is not recorded.
●To cancel the dubbing mode, press PR +/– so that the dubbing direction indicator (DV 
) goes off.
●When dubbing a Mini DV tape that was produced by audio
dubbing, you need to set “12BIT MODE” to the appropriate mode before playing back the tape. ( pg. 71)
You can dub selected scenes on a tape, starting and stopping wherever you wish.
A Load cassettes.
For the VHS deck
Insert a VHS (or
For the DV deck
Insert a Mini DV cassette with the erase protection switch set to “SAVE”.
B Select the dubbing direction.
Press 
.
●The dubbing direction indicator (DV 
) lights.
C Set the tape speed.
Press VHS, then press SP/LP (p).
●“DV ] VHS” appears on the TV screen if “O.S.D.” is set to “ON”. ( pg. 67)
D Locate the start point on the DV deck.APress DV.
BPress 4 to start playback.
CPress 9 to pause playback a little before the start point.
E Prepare the VHS deck for dubbing.APress VHS.
BPress and hold 9 and press 7 so that the VHS deck
enters the Record Pause mode.
●DV playback indicator and VHS recording indicator light.
F Start dubbing.Press START.
G Pause dubbing.Press START.
●The VHS deck enters the Recording Pause mode, then the DV deck enters the Dubbing Pause mode.
H End dubbing.Press 8 to stop recording on the VHS deck. Then press DV and press 8 to stop playback on the DV deck.