64SYSTEM CONNECTIONS (cont.)

Connecting To A Satellite Receiver

Connect the satellite receiver to the AV2 (L-2) IN/ DECODER connector, then connect the AV1 (L-1) IN/ OUT connector to the TV’s connector.

NOTES:

●Set “L-2 SELECT” to “A/V” ( pg. 53).

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel.

●For details, refer to the instruction manual of the satellite receiver.

Aerial

Outdoor unit

connector

Aerial

Back of TV

 

TV aerial

Satellite cable

cable

 

Satellite receiver

ANTENNA IN

TV

VCR

DECODER

ANTENNA OUT

21-pin SCART connector

Mains outlet

 

IN/OUT

 

AV1 (L-1)ENTREE/SORTIE

ANTENNA

 

ANTENNE

OUT

 

IN

S SORTIE

ENTREE

AUDIO

L

OUT

SORTIE

OUT

R

SORTIE

SAT CONTROL

 

CONTROLEUR SAT

AV2 (L-2)IN/DECODERENTREE/DECODEUR

Back of recorder

IMPORTANT

When you set “L-2 SELECT” to “SAT” ( pg. 53), it is possible to view a satellite broadcast with the TV set to its AV mode even if the recorder is in timer mode, in stop mode, in recording mode or turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the front display panel.

●Set “L-1 OUTPUT” to “VIDEO” and set the satellite receiver’s output and the TV’s input to the composite mode.

●When the recorder is turned off, only a composite signal is output from the recorder to TV.

●If you turn on the recorder when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.