Connections

Do not connect the power cord until all other connections have been made.

Connecting the FM and AM antennas

7AM loop antenna

Setting up supplied AM loop antenna

If reception is poor

Center unit

AM loop antenna

Outdoor single vinyl-covered wire antenna (not supplied)

If the antenna cord is covered with the insulation coat, twist and pull the insulation coat off and remove.

7FM antenna

Center unit

FM antenna (supplied)

Connecting AM loop antenna

1

Center unit

2

Antenna cord

If reception is poor

Center unit

Standard type (75 coaxial) connector

Extend the supplied FM antenna horizontally.

Outdoor FM antenna (not supplied)

Outdoor FM antenna cord (not supplied)

3

Turn the loop antenna until you have the best reception during AM broadcast program reception.

NOTE

Make sure the antenna conductors do not touch any other terminals, connecting cords or power cords. This could cause poor reception.

NOTE

We recommend that you use coaxial cable for the FM antenna as it is well-shielded against interference.

8