JVC TH-C43C Manual tuning, Tuner operations, you find the frequency you want, 2Press TUNING 9/( repeatedly until, 1Press FM/AM repeatedly to select the band

Tuner operations

IMPORTANT

Before using the remote control for the following operation;

1Set the remote control mode selector to

AUDIO.

2 Press FM/AM.

The buttons described below are used on pages 38 and 39.

Number buttons

Remote control mode selector

Cursor (3/2)

Manual tuning

On the remote control:

1Press FM/AM repeatedly to select the band.

Example:

When the system is tuned in to 810 kHz.

2Press TUNING 9/( repeatedly untilyou find the frequency you want.

When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.

On the center unit:

1Press SOURCE repeatedly to select the band (FM or AM).2Press TUNING +/– repeatedly until you find the frequency you want.

NOTE

•When an FM stereo program is received, the ST indicator lights on the display window.

38