Playback
•The icon such as 
shows the disc formats or file types the operation is available for.
IMPORTANT
Before using the remote control for the following operation;
1 Set the remote control mode selector to AUDIO.
2 Press DVD or USB MEMORY.
The buttons described below are used on pages 19 to 23.
Number buttons
Remote control mode selector
Cursor (3/2/Y/5)/
ENTER
(play button)
Basic playback
7 To play a disc1 Press the desired DISC• The system turns on and the disc tray comes out.
2 Place a disc.Label side up | When placing an 8 cm disc |
NOTE
•Up to 5 discs can be loaded.
•You can also start playback by pressing 3 (play button) or DVD.
•The system plays back available discs sequentially until you stop playback or until the disc loaded on the DISC 5 tray reaches to the end. However, when DVD VIDEO or DVD AUDIO is loaded in the system, playback of the disc next to the DVD VIDEO or DVD AUDIO will not start.
7To play a file in a USB mass storage class devicePress USB MEMORY.The operations of the files in a USB mass storage class device depend on the file types stored in the device.
For MP3/WMA files
The file control display (see page 28) appears on the TV screen.
For JPEG files
Each file (still pictures) is shown on the TV screen for about 3 seconds
For
Pressing TOP MENU/PG or MENU/PL shows the file control display (see page 28) on the TV screen during playback.
For DivX files
During the readout time, “READING INDEX” may appear on the TV screen.
Pressing TOP MENU/PG or MENU/PL shows the file control display (see page 28) on the TV screen during playback.
NOTE
•When several types of files are recorded on a disc/device, select appropriate file type on the set up menu. (See page 36.)
7To pause playbackPress 8.
To continue playback, press 3 (play button).
7To stopPress 7.
NOTE
•(For JPEG) The system cannot accept operations even though you press any buttons before the entire picture appears on the TV screen.
19