Advanced operations

 

See page 24 for button locations.

 

 

 

4 Press ENTER.

2 Follow the instructions that appear on

Example:

the TV screen to program the desired

 

chapters/tracks.
5 Press Cursor Y/5 to change the setting.6 Press ENTER.

The current VFP settings appear again.

7 Repeat steps 3 to 6 to adjust other parameters.8 Press VFP.

NOTE

•Although the setting display disappears in the middle of the procedure, the setting at that time will be stored.

Program Playback

7 While stopped

1 Press PLAY MODE repeatedly until program window appears on the TV screen.

PRG indicator lights on the display window.

•For details on using the number buttons, see “How to use the number buttons”. (See page 22.)

•The content’s numbers that you have to specify for programming varies depending on the disc/file type:

–DVD VIDEO: Titles and chapters

–VCD, SVCD, CD: Tracks

–DVD AUDIO, MP3, WMA: Groups and tracks

•Before you program the tracks in bonus group on a DVD AUDIO, perform the procedure of “Playing back a bonus group” (see page 23) to turn off the BONUS indicator on the display window.

•You can specify the chapters/tracks whose number is up to 99.

•There may be a case that the group or title number can be entered even for discs that contain no groups or titles. In such a case, press ENTER to proceed to the Track/Chapter column.

•When you press ENTER instead of the number buttons in the Track/Chapter column, “ALL” appears and all the tracks or chapters on the selected group or title are programmed as a step.

To clear the programs one by one from the last entered number

Press CANCEL repeatedly.

To clear all programs

Press and hold CANCEL.

You can also clear the program by turning off the system.

3Press 3(play button).

If all of the programmed tracks/files have been played back, playback stops and the program window appears again. Note that program setting remains.

To check the program contents

During playback, press 7. Playback stops and the program window appears.

To quit the Program mode

While stopped, press PLAY MODE repeatedly until both program

window and disappear from the TV screen.

NOTE

•When the source is USB MEMORY, Program Playback does not work.

•There may be a case where bonus group on a DVD AUDIO cannot be played.

•The Resume function cannot be used with Program Playback.

•DISC (1-5)on the remote control and DISC (1-5) 3 on the center unit do not work during Program Playback.

•Program Playback may not work for some discs.

32