Basic operations

See page 16 for button locations.

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of time has passed.

Press SLEEP.

Each time you press the button, the shut-off time changes.

Example:

minutes

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

To cancel

Press SLEEP repeatedly until “SLEEP – –” appears.

• Turning off the power also cancels the Sleep Timer.

Adjusting the output level of the subwoofer and speakers

1Press SPK LEVEL to show the target speaker indication on the displaywindow.

Each time you press the button, the indication of the speakers changes as follows:

FRNT L (Front Left speaker) Z FRNT R (Front Right speaker) Z CENTER (Center speaker) Z SURR L (Surround Left speaker) Z SURR R (Surround Right speaker) Z SUBWFR (Subwoofer) Z (back to the beginning)

2Press LEVEL +/– to adjust the output level from –6 to +6.

NOTE

•You can also make adjustments by using the setup menu shown on the TV screen. (See page 37.)

•The adjustments take effect for all sources.

Adjusting the sound

1Press TREBLE/BASS to show “TRE” or“BASS” on the display window.

Each time you press the button, the indication alternates between “TRE” and “BASS”.

•TRE: Select this to adjust treble sound.

•BASS: Select this to adjust bass sound.

2Press LEVEL +/– to adjust the level from– 10 to +10 (in 2 steps).

NOTE

• The adjustments take effect for all sources.

Changing the scan mode

The system can be accommodated to your TV’s scan mode.

NOTE

•To use the system in the progressive mode, it is required that the center unit is connected to the TV by using a component video cord (not supplied). (See page 12.)

7 While DVD or USB MEMORY is selected as the source and stopped

1 Press and hold SCAN MODE for2 seconds.

Currently selected scan mode appears on the display window.

2 Press Cursor 3/2to select the desired mode.

Each time you press the button, the scan mode changes as follows:

•480i*: Select this to change the scan mode to interlace mode.

•480p*: Select this to change the scan mode to progressive mode.

*480i and 480p indicate the number of scanning lines and scanning format of a video signal.

–480i indicates 480 scanning lines with interlaced format.

–480p indicates 480 scanning lines with progressive format.

•You can get better picture quality in the progressive mode than in the interlace mode.

3Press ENTER while the selected mode isdisplayed.

When the progressive mode is selected, the PROGRESSIVE indicator lights on the display window.

NOTE

•Although the picture may be distorted when you press ENTER, this is not a malfunction of the system.

•There are some progressive TVs and High-Definition TVs that are not fully compatible with this system, resulting in an unnatural picture when playing back a DVD VIDEO in the progressive scan mode. In such a case, change the scan mode to the interlace mode. To check the compatibility of your TV, contact your local JVC customer service center.

•All JVC progressive TVs and High-Definition TVs are fully compatible with this system.

18