7The front and surround speakers — TH-C6

Connections

Do not connect the power cord until all other connections have been made.

7The front and surround speakers TH-C6

The following procedure explains the front speaker assembly. The assembly of both the front and surround speakers are done in the same manner.

3

Front speaker

Surround speaker

Stand

(×2)

(×2)

(×4)

Base plate

(×4)

Before assembling —

Prepare a Phillips screwdriver (not supplied).

Take care not to drop any component part while assembling; otherwise, it may cause damage to the floor or injury.

1

Speaker

Stand

4

Red

Black

SpeakerManual background

Stand

White

Black

White

Black

Screw M5 x 25 mm (supplied)

Stand

Base plate

2

Screw M4 x 55 mm (supplied)

When installing the front and surround speakers on the wall;

Attach the supplied bottom cover on the bottom of each speakers as illustrated.

Bottom cover

Be sure to have them installed on the wall by a qualified personnel.

DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure.

Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

If attaching the stand to the speaker, remove the bottom cover by inserting a flat-pointed tool into the hole of the bottom cover.

9

Page 12
Image 12
JVC TH-C7 manual 7The front and surround speakers - TH-C6