1Take your position where you listen to the sound.

Basic operations

See page 16 for button locations.

Optimizing the speaker settings [Smart Surround Setup]

NOTE

When you change the positioning of the speakers or listener, or replace the supplied speakers with other ones, perform Smart Surround Setup again.

7While DVD is selected as the source and stopped

1Take your position where you listen to the sound.

2Press and hold SMART S. SETUP.

“SETTING” appears on the display window.

3Clap your hands over your head once.

4Make sure that “COMPLETED !” appears on the TV screen, then press

SMART S. SETUP.

The system detects your clapping sound through the satellite speakers, then automatically makes the best settings for each speaker. “COMPLETED !” appears on the TV screen when Smart Surround Setup completes.

When “FAILED !” appears on the TV screen

The system could not detect the clapping sound correctly. In such a case, follow the instructions that appear on the TV screen.

When the system detects the clapping sound as “FAILED !” three

times, set the delay time (DELAY) and the output level (LEVEL) manually. (A pg. 37)

To cancel

Press SMART S. SETUP.

NOTE

You need to set the subwoofer’s output level (LEVEL) manually. (A pg. 18)

In step 2, “SW ERROR” appears on the display window if the center unit and the powered subwoofer are not connected correctly by using the supplied system cord.

19

Page 22
Image 22
JVC TH-C7, TH-C6 manual 1Take your position where you listen to the sound, 2Press and hold SMART S. SETUP, Smart S. Setup