Note that the illustration below is for SP-PWC6.

Connections

Do not connect the power cord until all other connections have been made.

Note that the illustration below is for SP-PWC6.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Powered subwoofer

TH-C7: SP-PWC7

TH-C6: SP-PWC6

TH-C5: SP-PWC5

TH-C4: SP-PWC4

TH-C3: SP-PWC3

CAUTION:

SPEAKER IMPEDANCE

416

Center speaker TH-C7: SP-THC7C TH-C6: SP-THC6C TH-C5: SP-THC5C TH-C4: SP-THC4C TH-C3: SP-THC3C

Front speakers

TH-C7: SP-THC7F

TH-C6: SP-THC6F

TH-C5: SP-THC5F

TH-C4: SP-THC4F

TH-C3: SP-THC3F

Speaker cord

Connect the black cords to the black (r) terminals.

Connect the white cords to the (q) terminals referring to the table below:

FRONT SPEAKERS (LEFT)

White

 

 

FRONT SPEAKERS (RIGHT)

Red

 

 

CENTER SPEAKER

Green

 

 

SURROUND SPEAKERS (LEFT)

Blue

 

 

SURROUND SPEAKERS (RIGHT)

Gray

 

 

Surround speakers

TH-C7, TH-C5: SP-THC5S

TH-C6: SP-THC6S

TH-C4: SP-THC4S

TH-C3: SP-THC3S

CAUTION

When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer.

DO NOT connect more than one speaker to one speaker terminal.

Precautions for daily use

When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury.

Do not reproduce sounds at so high a volume that they are distorted; otherwise, the speakers may be damaged by internal heat buildup.

(For TH-C7, TH-C6 and TH-C5)

When holding a speaker, always grasp the lower portion.

Do not lean against the speakers, as the speakers could fall down or break, possibly causing an injury. Especially be careful that children do not lean against them.

11

Page 14
Image 14
JVC TH-C7, TH-C6 manual Note that the illustration below is for SP-PWC6