JVC TH-V70R manual Connections, Connecting a TV, To connect a TV without the Scart connector

Connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

Connecting a TV

To view pictures and on-screen displays, connect a TV to the center unit.

•Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.

•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. See page 62.

7To connect a TV without the SCART connector

TO SP-PWV70		AUX IN	DIGITAL IN
				AV
				COMPU
		R L	OPTICALLINK
FM 75	AM LOOP					VIDEO OUT
						VIDEO
		ANTENNA		AV	AV OUT
COAXIAL		AM EXT				S-VIDEO
							TV
H	V	RGB	Y / C
						AC IN
DISP.SET						Center unit
						To composite video input
RGB		Y / C				VIDEO
						Video cord (supplied)
Set the RGB-Y/C						S-VIDEO
						S-video cord (not supplied)
selector to “Y/C,”
						To S-video input
when connecting

an S-video cord.

If your TV has S-video (Y/C-separation) jack, connect it using an S-video cord.

By using this jack, you can get a better picture quality than using composite video connection.

• Connect S-video cord by matching the ∞ mark on the plug to the one on the system.

7To connect a TV with the SCART connector

Connect the center unit’s AV OUT (SCART) connector with your TV’s SCART connector using a SCART cable (not supplied).

•Set the RGB-Y/C selector correctly according to your TV.

–If the TV accomodates the RGB video signal, set the RGB-Y/C selector to “RGB” so that you can enjoy better-quality pictures.

–If the TV accomodates the S-video signal, set the RGB-Y/C selector to “Y/C.”

–If the TV accomodates the composite video signal only, set the RGB-Y/C selector to “RGB.”

TO SP-PWV70	AUX IN			DIGITAL IN
					AV
					COMPU
	R	L		OPTICAL	LINK
FM 75	AM LOOP						VIDEO OUT
							VIDEO
			ANTENNA		AV	AV OUT
COAXIAL	AM EXT						S-VIDEO
H	V
			RGB	Y / C			AC IN

DISP.SET

RGB Y / C

RGB-Y/C selector

Center unit

TV

SCART cable (not supplied)

To SCART connector

NOTES:

•When the RGB-Y/C selector is set to “RGB,” correct video signal is not output from the S-VIDEO jack on the rear panel.

•On the rear panel SCART connector is indicated as “AV OUT.” However, this terminal is designed as video output. So, no sound comes out.

•Whether the RGB-Y/C selector is set to “RGB” or “Y/C,” the composite video signal is always output from the VIDEO jack of the VIDEO OUT.

10