Introduction
Name of Parts
Camera
A
B
C
D
A Mounting hole (elliptical) x 4
Use these when mounting the camera to the electrical box. (A pg. 18)
NOTE:
When installing the camera onto the electric box, install it using the supplied adaptor ring.
B Mounting hole (round) x 4
Use these when mounting the camera to the ceiling or wall. (A pg. 14, 16)
C Outer Case
Use this in the following cases:
●When mounting the camera directly to the ceiling or on the wall. (A pg. 16)
●When mounting the camera to the electrical box. (A pg. 18)
D Dome Cover
The dome cover is fragile. Take care when handling it.
I
H
G
B
F
A
B
E
E Inner Dome
Before mounting the camera, remove it and perform switch setting and image angle setting. (A pg. 14, 16)
F Wiring Hole
Break and use this when drawing the cable from the camera unit without drilling a hole in the ceiling. (A pg. 18)
G Input Power cable
DC 12 V Input: Red (+12 V), Black (GND)
AC 24 V Input:
H Protection Cover
Upon connecting the coaxial cable, protect it by insulating the metal part of the BNC connector from the ceiling structure.
I Video signal output connector (BNC)
(A pg. 12)
8
