JVC TM-H1900G operating instructions HOW to Handle Basic Operations, Picture Adjustment

1-4

CONTROLS AND FEATURES (cont’d)

REAR VIEW

HOW TO HANDLE BASIC OPERATIONS

TM-H1900G

<Rear Panel>

BASIC OPERATION

1. Press the main power switch to turn on the power.

STATUS indication (PAL or NTSC)

To AC outlet (120 V AC, 50 Hz/60 Hz)

To AC outlet (230 V AC, 50 Hz/60 Hz)

19

For U.S.A. and Canada

19

For Europe

2. Press the POWER switch to turn on the power.

ON	:	Power turns ON. (Power indicator: lit)
POWER		Green: The main power is ON, and the monitor’s
OFF	:		power is ON (in the normal operation mode).
		Power turns OFF. (Power indicator: unlit)
		Orange	: The main power is ON, but the monitor’s
			power is OFF (in the standby mode)
		Unlit	: The main power is OFF.

3. Press the INPUT SELECT buttons to choose input.

PAL

About the STATUS indication

19

(Rear view of TM-H1900G shown)

Select video/audio signals input to terminals on the rear panel. The selected button lights in green.

A	B
		INPUT	Terminals on the rear panel
INPUT SELECT		SELECT
		buttons	Video signal input	Audio signal input

● With the COLOR SYSTEM setting set

to AUTO mode, when you turn on the

power or select inputs, the color

system indication appears for about

3 seconds on the screen while PAL or

NTSC signals are being detected.

No.51960

For the United Kingdom

17 Main power switch

Press the switch to turn the main power ON or OFF. When the main power is ON, the power indicator on the front panel lights in orange and the monitor enters the stand-by mode.

I : ON  : OFF

18 AC inlet [AC IN]

Power input connector. Connect the provided AC power

cord ( to an AC outlet (120 V AC or 230 V AC,

18 17

19 Power cord
Connects the provided power cord (120 V AC or	*.
230 V AC, 50 Hz/60 Hz) to the AC IN connector

Caution:

In North America (USA and Canada), this monitor comes with one power cable. In Europe and the United King- dom, two power cables are provided (one for use in continental European countries and the other for the UK). Be sure to use the power cable that is appropriate for the

1 Input A	VIDEO A terminal	AUDIO A terminal
(VIDEO)
2 Input B	VIDEO B terminal		AUDIO B terminal
(VIDEO Y/C)
	VIDEO B (Y/C) terminal

Note:The Y/C (S-video) terminal has priority.

4. Press the VOLUME/SELECT buttons to adjust the speaker volume.

Press this button to display the speaker volume level on the

VOLUME/SELECT	screen.
	+ : The Built-in speaker volume is increased. (00	[ 50)
	– :The Built-in speaker volume is decreased. (50	[ 00)
	* Screen indication will disappear about 10 seconds after operating.
	* The on-screen display goes off when you press MENU button.

It does not appear when receiving a

B/W signal or when no signal is input.

Refer to page 9 for more information

about COLOR SYSTEM setting and

page 10 for more information about

STATUS indication setting.

00 ~ 50

VOLUME : 20

– +

ENGLISH

50 Hz/60 Hz).

AC outlets used in your region. If none of the power cables provided is suitable, please contact your dealer or qualified service personnel to obtain the correct type of power cable.

PICTURE ADJUSTMENT

1.Press select buttons corresponding to the item you want to adjust.

CHROMA	CONTRAST	The item you select is displayed on the screen.		PHASE	: 00
		1 Chroma control	: Press the CHROMA/PHASE button once.
		2 Phase control	: Press the CHROMA/PHASE button twice.
PHASE	BRIGHT	3 Contrast control	: Press the CONTRAST/BRIGHT button once.
		4 Brightness control : Press the CONTRAST/BRIGHT button twice.

UPPER

–40 ~ +40

*Pressing the CHROMA/PHASE button and CONTRAST/BRIGHT button alternately while the item is shown on screen restores the previous status. When no item is shown on screen, CHROMA and CONTRAST have priority.

2.Adjust with the VOLUME/SELECT buttons.

	Items	VOLUME/SELECT button
VOLUME/SELECT
		–	+
	CHROMA	lighter	deeper
	(Chroma)
	PHASE	reddish	greenish
	(Phase)
	CONTRAST	lower	higher
	(Contrast)
	BRIGHT	darker	brighter
	(Brightness)

*Screen indication will disappear about 10 seconds after operating.

*The on-screen display goes off when you press MENU button.

PHASE : 00

–	+
Notes:	LOWER

●Phase control is effective only in the NTSC color system mode.

●Chroma control is not effective when receiving B/W or when no signal is input.

●When CHROMA is adjusted to “–40,” the picture becomes less colorful.

●“NO EFFECT” is displayed (for about 3 seconds) when your selected function has no effect.

●To change the display position on screen, set UPPER or LOWER with

ADJ. BAR POSI.

6 7