JVC TM-H1950CG operating instructions Pin No Signal, Digital signals, SDI 1 connector are output

Y/C (Mini DIN 4 pin) terminal specification

	2	4		Pin No.	Signal
	IN			1	GND (Y)
	1	3
			Y/C	2	GND (C)
		4
	2
OUT				3	Y
	1	3		4	C

No.	APPENDIX: CONNECTION EXAMPLES FOR THE
	SDI INPUT CARD
51961	● To use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked
	digital signals.)
	● Signal output from the SWITCHED OUT terminal can be changed by selecting INPUT C (SDI 1) or INPUT D (SDI 2). You can
	use the front panel buttons or do it via external control.
	● When INPUT-A or INPUT-B is selected, this terminal outputs the signals last selected. In the standby mode, signals from the
	SDI 1 connector are output.

MEMO

1-15

22

21

TM-H1950CG