JVC TM-H1950CG Display And Selection In The Menu Screen Mode Setting, Menu Mode Setting, No.51961

4): Indicates the

HOW TO USE THE MENU FUNCTIONS

DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING)

DISPLAY AND SELECTIONS IN THE <SET-UP

You can set the following menu items. Set them depending on your needs.

<MENU> screen

1< MENU >

MENU> MODE (SETTING)

• APERTURE	• COLOR SYSTEM
• ADJ. BAR POSI.	• COMPO. LEVEL*
• COLOR TEMP.	• RUSH DELAY

1. Press the MENU button.

MENU	The <MENU> screen is displayed.
	* The on-screen display goes off automatically after about five
	minutes with operation performed.

	4	APERTURE		:	00
		ADJ. BAR POSI.			:	LOWER
		COLOR TEMP.		: 6500
		COLOR SYSTEM		: AUTO
		COMP. LEVEL		:	00
2		RUSH DELAY		:	STD.		3
			EXIT			4

You can set the following set-up menu items.

• PICTURE SUB ADJ.	• WHITE BALANCE	• REMOTE SYSTEM
• H. POSITION	• CONTROL LOCK	• INPUT REMOTE
• V. POSITION	• STATUS DISPLAY

Notes:

● Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set

separately depending on the signal (Input A (VIDEO), Input B (VIDEO), Input C or

Input D) selected with the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in

<SET-UP MENU> screen

1<SET-UP MENU>

4 PICTURE SUB ADJ.

	H. POSITION	:		00
	V. POSITION	:		00
	WHITE BALANCE
	CONTROL LOCK		: OFF
	STATUS DISPLAY		: ON
	REMOTE SYSTEM		: MAKE
2	INPUT REMOTE		: A – D		3
		EXIT
				4

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select MENU items.

CHROMA	CONTRAST	VOLUME/SELECT	MENU
PHASE	BRIGHT

advance.

● WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature

value.

No.51961

CHROMA	CONTRAST
PHASE	BRIGHT
	APERTURE
	ADJ. BAR POSI.
	COLOR TEMP.
	COLOR SYSTEM
	COMPO. LEVEL*

A selection mark (	4) is put next to the selected item.
Front panel	Function	Contents
button	displayed
CHROMA/		Forward selection mark (	4)
PHASE
CONTRAST/		Reverse selection mark (	4)
BRIGHT

<Front panel buttons>

1 Selection mark ( menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the current

settings (value).

4 Function display: The functions of

the front panel buttons (5 buttons on

the left) correspond to the function

Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.

● INPUT REMOTE is shown when REMOTE SYSTEM is set to MAKE.

1.While pressing the MENU button, press the CHROMA/PHASE button.

CHROMA	MENU	The <SET-UP MENU> screen is displayed.
		* The on-screen display goes off automatically after about five
PHASE		minutes with operation performed.

CHROMA	CONTRAST	VOLUME/SELECT	MENU
PHASE	BRIGHT
	<Front panel buttons>
1 Selection mark (			4): Indicates the
	menu item you select.
2 Menu item: Menu items you can				ENGLISH
	select.
3 Setting display: Indicates the
	current settings (value).

RUSH DELAY

3. Press the VOLUME/SELECT buttons to set.

displayed.

Function	Contents
displayed

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT

button to select the desired menu item.

4 Function display: The functions of

the front panel buttons (5 buttons

on the left) correspond to the

function displayed.

VOLUME/SELECT	Front panel	Function	Contents
	button	displayed
	VOLUME/	+	Increase (to max. value)
	SELECT (+)	4	Forward the setting value
	VOLUME/	–	Decrease (to min. value)
	SELECT (–)
		1	Reverse the setting value

Menu items	Purpose		Setting range
APERTURE	Picture aperture level	00	+01 • • • • • • • • • •+39• • +40
ADJ.BAR POSI	Volume bar position	LOWER	UPPER

	Forward the menu item.
	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
4	Forward the setting value.
1	Reverse the setting value.
EXIT	Exits the <MENU> screen.

CHROMA	CONTRAST
PHASE	BRIGHT

PICTURE SUB ADJ.

H.POSITION V. POSITION

WHITE BALANCE CONTROL LOCK STATUS DISPLAY

A selection mark (	4) is put next to the selected item.
Front panel	Function	Contents
button	displayed
CHROMA/		Forward selection mark (	4)
PHASE
CONTRAST/		Reverse selection mark (	4)
BRIGHT

Function	Contents
displayed
	Forward the menu item.
	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
4	Forward the setting value.
1	Reverse the setting value.

COLOR TEMP.	Color temperature of white	6500			9300
	balance
COLOR SYSTEM	Color system	AUTO	NTSC			AUTO	PAL
COMPO. LEVEL*	Component level	– 40	– 39 • •– 01				00 +1 • • +9 +1
RUSH DELAY	Delay time	STD.		SLOW

*For normal use, leave the COLOR SYSTEM setting to AUTO.

If reception is unsatisfactory in AUTO position, set it to the appropriate color system mode (NTSC or PAL).

*COMPO. LEVEL is displayed only with component serial digital (SDI) input. (Shown with INPUT-C and INPUT-D except for RGB input.)

4.If you want to set the other menu items, repeat procedures 2 and 3.

5.Press the MENU button to quit.

MENU	Front panel	Function	Contents
	button	displayed
	MENU	EXIT	Quit (or Release) the <MENU>
			screen

Note:

●RUSH DELAY sets the delay between the time the power switch is pressed and the time power is actually supplied to the monitor’s circuits. STD. : Power turns on approximately

1 second after the power switch is pressed.

SLOW : Power turns on approximately 3 seconds after the power switch is pressed.

*When turning on multiple Color- Video Monitors simultaneously, it is recommended to use STD. or

SLOW settings to reduce the rush current of the entire system.

REMOTE SYSTEM

INPUT REMOTE

3. Press the VOLUME/SELECT buttons to set.

VOLUME/SELECT	Front panel	Function		Contents
	button	displayed
	VOLUME/	+		Increase (to max. value)
		4		Forward the setting value
	SELECT (+)
		CUTO	Selects CUT OFF setting screen
	VOLUME/	–		Decrease (to min. value)
	SELECT (–)	1		Reverse the setting value
		DRV		Selects DRIVE setting screen

Notes:

●For WHITE BALANCE items, select the CUT OFF or DRIVE setting screen, then select the function display for adjustment.

●Press the EXIT (MENU) button to return to the <SET-UP MENU> screen.

EXIT	Exit the <MENU>
	screen.
DRV	Selects DRIVE adjustment.
CUTO	Selects CUT OFF
	adjustment.
RB	Adjusts red and blue
	signal level.
RGB	Adjusts red, green and
	blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only
	in the DRIVE or CUT OFF
	adjustment mode.)

TM-H1950CG

1-9 12

13