JVC TM-H1950CG CONTROLS AND FEATURES cont’d, Controls And Features, Rear View, No.51961

1-6

CONTROLS AND FEATURES (cont’d)

REAR VIEW

<Rear Panel>

CONTROLS AND FEATURES

(INPUT CARD: OPTIONAL)

COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG)1 Video input/output terminals

TM-H1950CG

Input (IN) and output (OUT) terminals for component (color deference) or RGB signals.

To AC outlet (120 V AC, 50 Hz/60 Hz)

To AC outlet (230 V AC, 50 Hz/60 Hz)

25

For U.S.A. and Canada

25

For Europe

25

For the United Kingdom

24

(Rear view of TM-H1950CG shown)

23

G / Y

INOUT

B/P B /B-Y

INOUT

R/P R /B-Y

INOUT

HD/C S

INOUT

VD

INOUT

AUDIO

IN OUT

1

2

3

4

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Select component signal : press INPUT SELECT C button

Select RGB signal : press INPUT SELECT D button

2 Synchronized signal input/output terminals

Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronized signals.

External sync is available with RGB input only. The IN and OUT terminals are bridge-connected.

(When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

G on SYNC cannot be used with RGB input.

3 Audio input/output terminals

Input (IN) and output (OUT) terminals for audio signals.

The IN and OUT terminals are bridge-connected.

4 Connection terminal (to a Color Video Monitor)

Attach to the connection terminal of your color video monitor.

ENGLISH

No.51961

23 Main power switch

Press the switch to turn the main power ON or OFF. When the main power is ON, the power indicator on the front panel lights in orange and the monitor enters the stand-by mode.

I : ON  : OFF

24 AC inlet [AC IN]

Power input connector. Connect the provided AC power

cord t to an AC outlet (120 V AC or 230 V AC, 50 Hz/60 Hz).

25 Power cord

Connects the provided power cord (120 V AC or	r.
230 V AC, 50 Hz/60 Hz) to the AC IN connector
Caution:
In North America (USA and Canada), this monitor comes
with one power cable. In Europe and the United Kingdom,
two power cables are provided (one for use in continental
European countries and the other for the UK). Be sure to
use the power cable that is appropriate for the AC outlets
used in your region. If none of the power cables provided

SDI INPUT CARD (OPTIONAL: IF-C01SDG)

1 Output terminal for a selected component serial digital signal

is suitable, please contact your dealer or qualified service

personnel to obtain the correct type of power cable.

SWITCHED
OUT
IN	SDI 1
IN	SDI 2
AUDIO1
IN	OUT

AUDIO2

Note:

1

2

3

4

Output terminal for a selected digital signal (the input displayed on the screen). The output signal is cable- compensated.

NOTE: When the monitor’s main power is OFF, no digital signal is output.

In the standby mode, the signal from the SDI 1 terminal is output.

2 Input terminals for component serial digital signals

Input terminals for the digital signal.

Select SDI 1 : press INPUT SELECT C button

Select SDI 2 : press INPUT SELECT D button

3 Audio input/output terminals

Input (IN) and output (OUT) terminals for the analog signals corresponding to SDI 1 and SDI 2.

NOTE: This input card cannot decode audio data even if contained in the input digital signal.

●The optional input cards shown below cannot be used.

Using any of these cards will void your warranty and may result in damage or malfunction.

*Video input card (IF-C01PNG) *HD-SDI input card (IF-C01HSDG) *HD-SDI input card (IF-C12HSDG)

4 Connection terminal (to a Color Video Monitor)

Attach to the connection terminal of your color video monitor.

6 7