When disconnecting the iPod, make sure that the System is turned off.
To remove the connector from your iPod, squeeze the buttons on the sides and pull.
✎IMPORTANT
•Always set volume to “VOLUME MIN” when connecting or disconnecting the other equipment.
•Connect the USB mass stotrage class device directly to the system. Using a USB hub may result in malfunction.
•Coded or encrypted tracks in a special method cannot be played on the unit.•The USB mass storage device’s battery is charged while the System is turned on.
To playback sounds on the iPod
To start: | To pause: |
To select a track
Decrease the track numbers 
Increase the track numbers
Search... Press and hold 4or ¢.
OFF... Press and hold 6.
Playing Back from the USB mass storage class device
This System is equipped with a USB MEMORY terminal on the front panel.You can connect a USB mass storage class device such as a USB flash memory device, Digital Audio Player (DAP), etc. to this System.This System cannot recognize a USB mass storage class device whose rating exceeds 5V/500mA.
•Remember you cannot send any data to your USB mass storage class device from this System.
To connect the USB mass storage class device
When connecting a USB mass storage class device, refer also to its manual.
or 
DAP
•When disconnecting the USB mass storage class device, make sure that the System is in the stop condition.
To playback sounds on the
USB mass storage class device
✎IMPORTANT
•An iPod does not play on the USB MEMORY terminal. “RESTRICT” appears on the display when an iPod is connected to the USB MEMORY terminal while USB MEMORY is selected for the source.
To start: | To stop: | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•The USB MEMORY lamp on the left of the USB MEMORY terminal flashes while USB MEMORY is selected for the source.
13