Manuals / Brands / Home Audio / Stereo System / JVC / Home Audio / Stereo System

JVC UX-EP25 To assemble and connect the AM loop antenna, To connect the speaker cords, To connect the AM loop antenna, To assemble the AM loop antenna

1 35

Download 35 pages, 1.85 Mb

To assemble and connect the AM loop antenna

To assemble the AM loop antenna

To connect the AM loop antenna

Make sure to connect the wire correctly.

•If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord.This could cause poor reception.

To connect the speaker cords

Make sure the both speakers are connected correctly and ﬁrmly.

When connecting the speaker cords, match the polarity of the speaker terminals.

Red (+) terminal : white cord of the speaker cord

Black (–) terminal : black cord of the speaker

cord

•DO NOT connect more than one speaker to each terminal.

• DO NOT allow the conductor of the speaker cords to be in touch with the metallic parts of the System.

Contents

UX-EP25—Consists of CA-UXEP25and SP-UXEP25 For Customer Use: (For U.S.A.) CAUTION For the main unit: Note to CATV system installer: For Canada/pour le Canada IMPORTANT FOR LASER PRODUCTS / IMPORTANT POUR PRODUITS LASER ATTENTION Advanced Disc/USB mass storage class device Operations Precautions How to Read This Manual Step 1: Step 2: Step 3: Step 1: Unpack Step 2: Prepare the Remote Control Step For better FM/AM reception Outdoor FM antenna (not supplied) Vynil-coveredwire (not supplied) AM loop antenna FM antenna (supplied) AM loop antenna (supplied) Turn it until the best reception is obtained Speaker cord (supplied) Connect the white cord to the red (+) terminal To assemble and connect the AM loop antenna To connect the speaker cords 1 Main display 2 FM reception indicators Indications on the main display 3Play mode indicators 4AHB PRO (Active Hyper Bass Pro) indica- tor For private listening Listening to the Radio Playable media and ﬁles Playing Back a Disc Playing back from iPod Playing Back from the USB mass storage class device For MP3/WMA playback MP3/WMA groups/tracks conﬁguration Resume Play for MP3/WMA To activate/cancel resume play Playing Back from the PC How to install the USB drivers To play back sounds on the PC Playing Back from Other Equipment To connect other equipment To select other equipment for the source Adjusting the Volume Adjusting the Sound To reinforce the bass sound — AHB PRO Remote To adjust the bass Changing the Display Brightness — DIMMER Setting the Clock To check the current time during play If there is a power failure Turning Off the Power Automatically To turn off the System after a certain period of time — Sleep Timer To turn off the System after playback is over — Auto Standby Programming the Playing Order — Program Play Playing at Random — Random Play Playing Repeatedly — Repeat Play When the on-timecomes Setting the Timer To turn off the Timer after its setting is done 1 Select the Timer setting 2 Turn off the Timer Learning More about This System Daily Operations—Playback (see pages 9 to 16) Adjustments (see pages 17o 19) (see pages 20 to 22) Timer Operations (see pages 23 to 24) Troubleshooting General: Maintenance To clean the disc: Speciﬁcations Parts Index Do not attempt to service the product yourself Caution LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A 1 YR SYSTEM COMPONENT MICRO EP25-UX