Xerox 604P18057 Description and Remedy, Fault Codes, 016-702, Add memory, 016-703, 016-704

	Fault Codes
Code	Description and Remedy
016-702	PCL print data could not be processed as there was insufficient space in the
	print page buffer. Take one of the following actions.
	• Lower the resolution in the print driver.
	• Increase the size of the print page buffer.
	• Add memory.
016-703	An e-mail specifying a non-registered or invalid mailbox number was received.
	Take one of the following actions.
	• Register the mailbox with the specified number.
	• Send an e-mail to a valid mailbox.
016-704	The hard disk ran out of space because the mailboxes are full. Delete
	unnecessary documents from the mailboxes.
016-705	The document could not be saved for Secure Print because the optional hard
	disk is not installed. The hard disk is required to use the Secure Print feature.
016-706	The hard disk ran out of space because the maximum number of users for
	secure printing was exceeded. Delete unnecessary documents or users
	registered for the Secure Print feature.
016-707	Sample prints cannot be made because the hard disk is malfunctioning. Contact
	the Xerox Welcome Center.
016-708	[Annotation] cannot be made because the hard disk is malfunctioning. Delete
	unnecessary documents from the disk.
016-710	Delayed prints cannot be made because the hard disk is malfunctioning.
	Contact the Xerox Welcome Center.
016-711	The e-mail size exceeds the maximum value allowed. Try one of the following
016-985	procedures and resend the e-mail.
	• Reduce the number of pages in the document.
	• Lower the resolution in [Scan Resolution].
	• Reduce the document size using [Reduce/Enlarge].
	• Increase the maximum value in [Maximum E-mail Size] using the Key
	Operator access.
016-716	The TIFF file could not be spooled as the size of the file exceeded the remaining
	space on disk. Increase the size of the PCL form area.
016-721	An error occurred while printing a job. The Auto Tray Switching feature was
	enabled when [Auto Paper Off] is selected for all paper trays on the [Paper Type
	Priority] screen. When the Auto Tray Switching feature is enabled, select a
	paper type other than [Auto Paper Off] on the [Paper Type Priority] screen.
016-728	The TIFF file contains unsupported tags.
016-729	The TIFF file could not be printed as the number of colors and resolution of the
	TIFF file exceeded the limit. Change the number of colors and resolution of the
	TIFF file, and instruct it to print again.
016-731	Printing of the TIFF data stopped midway. Instruct it to print again.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 331