Xerox 604P18057 manual Supported Paper Sizes and Types, Standard Sizes

Supported Paper Sizes and Types

•Store paper in dry conditions, away from extreme heat or cold, such as radiators or open windows.

•Store paper flat on a shelf or pallet above floor level.

•Leave the paper wrapped and boxed until ready to be used.

•Re-wrap partly used packages of paper.

NOTE: Paper should not be stored in the paper trays.

Supported Paper Sizes and Types

This section lists the sizes and types of paper that can be used with the machine.

Supported Paper Sizes

The following table lists the paper sizes supported for each paper tray, duplex module and the finisher.

NOTE: For the capacity of each tray, refer to the Specifications chapter.

Standard Sizes

NOTE: The standard sizes of paper that can be detected vary depending on the paper size table specified by the Key Operator. For information on setting the paper size table, refer to Paper Size Settings in the Setups chapter on page 201.

Paper Size	Dimensions			LEF/SEF	Tray 1, 2/Tray 3, 4	Tray 3, 4	Tray 5	Duplex	Finisher
		(mm)			(Two Tray Module)	(TTM)	(Bypass)	Module
A6	105.0		148.0	LEF	X	X	O	X	X
A5	148.0		210.0	SEF	O	X	O	O	X
				LEF	X	X	O	O	X
A4	210.0		297.0	SEF	O	X	O	O	O
				LEF	O	O	O	O	O
A3	297.0		420.0	SEF	O	X	O	O	O
B6	128.5		182.0	SEF	X	X	O	O	X
				LEF	X	X	O	O	X
B5	182.0		257.0	SEF	O	X	O	O	X
				LEF	O	O	O	O	O
B4	257.0		364.0	SEF	O	X	O	O	O
5.5 × 8.5”	139.7		215.9	SEF	O	X	O	O	X
				LEF	X	X	O	O	X
7.25 × 10.5”	184.2		266.7	SEF	X	X	O	O	X
				LEF	O	O	O	O	O

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 185