Xerox 604P18057 Sample Set, Chapter Division, Change Settings, Stop, Last Original, Next Original

3 Copy

Sample Set

Prints one set of the job prior to printing the whole quantity. You can choose whether or not to print more sets after checking the print result.

•Off – Disables the feature.

•On – Enables the feature. After copying one set of the job, the job is suspended. Select [Start] to copy the remaining sets or [Stop] to stop the job.

NOTE: Copies produced by [Sample Set] are counted towards the total copy count.

After each section of the document is scanned, the following screen is displayed.

Chapter Division

Displays the [Chapter Division/Separators] screen. The following options are available.

•Off – Disables the feature.

•Chapter Division – Automatically splits chapters. When using the double-sided copy option, the first page of the next set is copied onto the front of the paper. This means the back of last paper copied will be blank, if the last page of the previous set is odd.

•Separators – Automatically splits chapters and places a separator page between chapters. Select one of the five presets for [Separators Tray] including the bypass tray to specify the tray for separator pages. For more information on the bypass tray, refer to [Tray 5 (Bypass)] Screen on page 52.

Change Settings

Allows you to change the settings on the [Change Settings] screen before scanning the next section. Press the <Start> button on the control panel to start scanning.

Stop

Deletes the copy job controlled by the [Build Job] feature.

Last Original

Select this option to indicate that you have finished scanning the whole job.

Next Original

Select this option to sequentially scan more sections for the job.

Start

Starts scanning the next section.

76 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide