Xerox 604P18057 manual Store, Enter/Change Name, Delete

7 Stored Programming

NOTE: Stored Programming is saved by button position on the touch screen. Therefore any changes to the button position will result in changes to the stored operation. The button position changes when adding/deleting Job Flow Sheet, Job Template, or Address Book to and from a stored job."

1.Press the <All Services> button on the control panel.

2.Select [Setup Menu] on the touch screen.

3.Select [Stored Programming] on the [Setup Menu] screen.

4.Perform the necessary operations.

5.Select [Save].

Store

Allows you to register a series of operations in a job number. After selecting the required job number (1 to 40), perform a series of operations to be stored. Once all operations have been programmed, press the <Start> button on the control panel to register the operations in the job number.

Delete

Clears the contents of a selected job number. Select this button, followed by the job number you want to clear.

Enter/Change Name

Allows you to assign or change a name for a job number. Select this button, followed by a job number. Then enter a name (up to 18 characters) using the screen keyboard. For information on keyboard entry, refer to Keyboard in the Fax/Internet Fax chapter on page 83.

140 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide