Xerox 604P18057 manual Power On/Off, Ground Fault Interrupter GFI, Powering On, Powering Off

2 Product Overview

Power On/Off

Powering On

Ensure that the machine is connected to a suitable power supply and that the power plug is firmly connected to the electrical outlet.

The machine is ready to make copies about 12 seconds after powering on (varies with machine configuration). For more information, refer to Machine Specifications in the Specifications chapter on page 341.

1. Press the power switch to the

<I> position.

NOTE: If the machine does not start up, check that the RESET button on the back of the machine is in the reset position (depressed).

Powering Off

When you switch off the machine, if it is equipped with the optional hard disk, it remains on for approximately 10 seconds while it stores files and prepares for shutdown. The machine then shuts down completely.

CAUTION: Wait at least 20 seconds between powering the system on and off. Failure to do this could cause damage to the hard disk.

Ground Fault Interrupter (GFI)

If a fault is detected in the power supply to the machine, a Ground Fault Interrupter (GFI) device on the machine automatically cuts all electrical power. If power is interrupted, locate the RESET button on the back of the machine. If the GFI has been triggered, the RESET button will be in the tripped position. To restore power to the machine, press the RESET button.

38 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide