Xerox 604P18057 Mixed Size Originals, Border Erase, Normal, Variable Erase, Original Orientation

Scan Options

Mixed Size Originals

This feature allows you to scan mixed sizes of documents using the document feeder at the same time and save them in a single file.

NOTE: To enable the feature, select [Auto Size Detect] on the [Scan Size] screen.

1.Select [Mixed Size Originals] on the [Scan Options] screen.

2.Select [On] to enable the feature.

3.Select [Save].

Border Erase

When scanning bound documents or scanning with the document feeder or document glass cover open, black marks may appear around the edges or on the center binding area of the output. These marks can be erased using this feature.

1.Select [Border Erase] on the [Scan Options] screen.

2.Perform the necessary operations.

3.Select [Save].

Normal

Uses the default values for the edge or center area to be erased. The default values are set in [Variable Erase]. If you do not want to erase any edge and/or center area, select [Variable Erase] and then select 0.0 using the scroll buttons.

Variable Erase

Allows you to adjust the edge or center area to be erased. Enter the amount you want to erase from the top, bottom, right, left, and center margins. Up to 50 mm (2 inches) can be entered.

Original Orientation

•Head to Top – Select to position documents with the head of the document away from the operator.

•Head to Left – Select to position documents with the head of the document to the operator’s left. For this orientation, documents are scanned so that the head of scanned result is away from the operator.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128133 User Guide 127