Xerox 604P18057 manual Specify the Destination, Basic Features - Fax/Internet Fax - page

Fax/Internet Fax Procedure

• Not available in the double-sided mode.

NOTE: In both single-sided and double-sided modes, scanning a document at its original size or smaller is recommended. An enlarged image may be cut off during transmission.

2. Select the Features

The features available on the [Basic Features] screen are those used most often. NOTE: Only those features relevant to the machine configuration will be available.

1.Press the <All Services> button on the control panel.

<All Services> button <Clear All> button

2.Select [Fax/Internet Fax] on the touch screen. Ensure that the [Basic Features] screen is displayed.

NOTE: If the Authentication feature is enabled, you may be required to enter the user ID and password (if

one is set up). If you need assistance, contact the Key Operator.

3.Press the <Clear All> button once on the control panel to cancel any previous selections.

4.Select the button for the feature required. If [More] is selected, select [Save] to confirm the selected feature or [Cancel] to return to the previous screen.

If necessary, press one of the tabs and configure the fax/Internet Fax settings. For information on the individual tabs, refer to the following.

Basic Features - Fax/Internet Fax – page 87

Image Quality - Fax/Internet Fax – page 90

Scan Options - Fax/Internet Fax – page 90

Send Options - Fax/Internet Fax – page 93

On-hook/Others - Fax – page 103

3. Specify the Destination

The following explains how to specify a destination. The machine allows the following dialing methods (fax numbers or e-mail addresses).

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 79