Xerox 604P18057 manual Screen Messages, Code, Description and Remedy, Problem Solving

16 Problem Solving

Code	Description and Remedy
116-749	The print job was stopped because the specified font was not found. Install the
	font or enable font replacement in the print driver.
116-771	The parameter values were corrected because the machine encountered a
116-772	problem when printing the data. If the received image is incomplete or
116-773	damaged, ask the other party to check the image or to resend the data. When
116-774	Internet Fax forwarding is enabled, check with the recipient if they received the
116-775	image intact.
116-776
116-777
116-778
116-780	There is a problem with the document attached to the received e-mail. Check
	the attached document.
124-701	Due to a malfunction in the specified tray, the output destination was changed to
	the center output tray. Contact the Xerox Welcome Center. Use a different
	paper tray.

Screen Messages

Along with fault codes, the following messages are displayed on the touch screen in some occasions.

Message	Description and Remedy
A fault has occurred.	A fault has occurred. Switch off the machine
Switch off the machine. Ensure that the	and wait until the touch screen is turned off
screen disappears before switching it on.	completely, and then restart the machine. If
If the problem persists, call for service.	the problem persists, write down the fault
	code (xxx-yyy) displayed on the screen.
	Switch off the machine and contact the Xerox
	Welcome Center.
A fault has occurred. The machine has	The machine was restarted due to a fault.
rebooted. If the problem persists, call for	Resume normal operations. If the problem
service.	persists, contact the Xerox Welcome Center.
Processing has been cancelled due to an	The machine operation has stopped due to a
error.	fault. Restart the job.
See User Guide for information on fault code.

338 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide