Xerox 604P18057 manual Doc for Polling - Auto Delete, Rotate 90 degrees, Sender ID, Batch Send

11 Setups

Doc for Polling - Auto Delete

Sets whether to delete the document data for the [Store for Polling] feature on the [On- hook/Others] screen from the memory automatically after the remote machine polled your document.

Rotate 90 degrees

Sets whether to rotate the image automatically to be sent without reducing the document size as far as possible when you select [Auto %] in the [Reduce/Enlarge] feature on the [Scan Options] screen.

Sender ID

Sets whether to notify the remote machine of the machine’s fax number when you send documents with [G3 Auto] in the [Communication Mode] feature on the [Send Options] screen.

Transmission Interval

Sets the period between transmissions within the range of 3 to 255 seconds using the scroll buttons or the numeric keypad on the control panel. The longer the transmission interval, the longer the total time spent for operation, but the machine can receive faxes during the standby time.

Batch Send

Sets whether to send up to four pending documents automatically to an identical destination with a single phone call thereby reducing telephone charges.

Manual Send/Receive Default

Sets the default for whether the [Manual Receive] or [Manual Send] button is to be selected when you use the [On-Hook] feature on the [On-Hook/Others] screen.

Fax Receiving Mode

Sets the default for fax reception mode choosing between [Auto Receive] or [Manual Receive].

Border Limit

Sets the value to divide a document onto two pages when the received documents are longer than the loaded paper size. You can set the value within the range of 0–127 mm (0–5.0 inches) using the scroll buttons or the numeric keypad on the control panel. We recommend setting this feature with the following [Auto Reduce on Receipt] feature.

Auto Reduce on Receipt

If the received document length exceeds the length of the loaded paper but is within the value set in the Border Limit feature, the machine reduces and reproduces an image onto a single page. We recommend setting this feature with the above [Border Limit] feature. If this feature is set to [Off] and the document length exceeds the paper length, image loss may occur.

232 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide