Xerox 604P18057 manual Paper Supply, Trays 1, 2 & 3, 4 Two Tray Module, Tray 5 Bypass

Paper Supply

(Custom size) for width: 139.7 to 297 mm (5.5 to 11.7”) / for length: 210 to 432 mm (8.3 to 17.0”).

Long Document Scan Feature: 297 × 600 mm (11.7 × 23.6”) maximum length

NOTE: This feature is not available in the double-sided mode. When using this feature to scan long documents which exceed 432 mm (17.0 inches), the operator must feed the document one sheet at a time. The paper weight should be between 60 and 90 g/ m2.

Document Weight: 38 to 128 g/m2 (50 to 128 g/m2 in double-sided mode)

Mixed Sizes: Yes – if so specified on the machine and the lead edges of documents have the same dimension.

Auto Size Sensing: Yes

NOTE: The standard sizes of documents that can be detected vary depending on the paper size table specified by the Key Operator. For information on setting the paper size table, refer to Paper Size Settings in the Setups chapter on page 201.

Paper Supply

NOTE: The standard sizes of documents that can be detected vary depending on the paper size table specified by the Key Operator. For information on setting the paper size table, refer to Paper Size Settings in the Setups chapter on page 201.

Trays 1, 2 & 3, 4 (Two Tray Module)

Capacity: 500 sheets of 80 g/m2 (20 lb bond) paper per tray

Paper Weights: 60 to 105 g/m2 for Tray 1 and 60 to 216** g/m2 for Trays 2, 3, and 4

Paper Sizes: For width: 140 to 297 mm (5.5 to 11.7”) / for length: 182 to 432 mm (7.2 to 17.0”).

Auto Size Sensing: Yes

Tray 5 (Bypass)

Capacity: Approximately 95 sheets of 80 g/m2 paper (100* sheets of 20 lb bond paper)

*: Using standard paper 4200 3R2047.

NOTE: The paper stack height must not exceed 10 mm (0.4 inches).

Paper Weight: 60 to 216** g/m2

Paper Sizes: For width: 89 to 297 mm (3.5 to 11.7”) / for length: 99 to 432 mm (3.9 to 17.0”).

Auto Size Sensing: Yes

Tray 3, 4 (Tandem Tray Module)

Capacity: Tray 3 (Left-hand tray): 800 sheets

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 343