Xerox 604P18057 manual Operational Safety Information, Do Not Do These

Safety Notes

With specific regard to laser safety, the equipment complies with performance standards for laser products set by government, national and international agencies as a Class 1 laser product. It does not emit hazardous light, as the beam is totally enclosed during all phases of customer operation and maintenance.

Operational Safety Information

To ensure the continued safe operation of your Xerox/Fuji Xerox equipment, follow these safety guidelines at all times.

Do These:

•Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a qualified electrician.

ZThis equipment must be connected to a protective earth circuit.

This equipment is supplied with a plug that has a protective earth pin. This plug will fit only into an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use a plug that lacks an earth connection terminal to connect the product to an electrical outlet.

•Always follow all warnings and instructions that are marked on or supplied with the equipment.

•Always exercise care when moving or relocating equipment. Please contact your local Xerox/Fuji Xerox Service Department, or your local support organization to arrange relocation of the product to a location outside of your building.

•Always locate the equipment in an area that has adequate ventilation, and space for servicing. See installation instructions for minimum dimensions.

•Always use materials and supplies specifically designed for your Xerox/Fuji Xerox equipment. Use of unsuitable materials may result in poor performance.

•Always unplug this equipment from the electrical outlet before cleaning.

Do Not Do These:

•Never use a plug that lacks an earth connection terminal to connect the product to an electrical outlet.

•Never attempt any maintenance procedures that are not specifically described in the customer documentation.

•This equipment should not be placed in a built-in unit unless proper ventilation is provided. Please contact your authorized local dealer for further information.

•Never remove covers or guards that are fastened with screws. There are no operator serviceable areas within these covers.

•Never locate the equipment near a radiator or any other heat source.

•Never push objects of any kind into the ventilation openings.

•Never override or “cheat” any of the electrical or mechanical interlock devices.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 19