Xerox 604P18057 manual Storing and Handling Paper, Tandem Tray Module TTM, Auto Tray Switching

10 Paper and Other Media

Tandem Tray Module (TTM)

The Tandem Tray Module allows you to load larger amounts of paper. It consists of two trays.

NOTE: You cannot load custom size paper into the Tandem Tray Module.

1. Pull out the Tray 3 or Tray 4 of TTM.

The elevator in the tray lowers.

2. Place the paper stock tightly against the left rear corner of the tray.

NOTE: Do not load paper above the maximum fill line.

NOTE: Always load paper into the tray in the orientation shown in the diagram.

3.Close the tray.

The elevator rises and positions the paper for use.

Auto Tray Switching

The machine automatically switches from one tray to another under the following conditions.

•When printing and the active tray runs out of paper.

•When the paper size sensed differs from the previously determined size.

•When paper feeding starts and the selected tray is open.

•When paper feeding starts and the selected tray malfunctions.

NOTE: The bypass tray cannot be used with Auto Tray Switching.

NOTE: Key Operator access is required to set target trays and priorities. For more information, refer to Paper Tray Priority in the Setups chapter on page 196 and Paper Type Priority in the Setups chapter on page 196.

When not in use, the paper trays can be opened and paper can be loaded while the machine is running. However, do not open the active tray. This will cause the machine to stop the job being processed.

Storing and Handling Paper

Always use high-quality, xerographic-grade paper in the machine. Damaged, curled, or damp paper can cause jams and image quality problems. Follow these simple rules to store paper.

184 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide