Xerox 604P18057 manual Allocate Memory, PostScript Memory, Receiving Buffer - Parallel

Print Mode Settings

Allocate Memory

Use this feature to specify memory capacities required for printing and for the receive buffer for each interface.

1.Select [Allocate Memory] on the [Print Mode Settings] screen.

2.Use the scroll buttons to switch between screens.

3.Perform the necessary operations.

4.Select [Close].

PostScript Memory

Allows you to change the PostScript memory capacity within the range of 8.00–96.00 MB in 0.25 MB increments using the scroll buttons or the numeric keypad. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.”

Receiving Buffer - Parallel

Allows you to change the input buffer memory capacity when using the parallel port within the range of 64–1,024 KB in 32 KB increments using the scroll buttons or the numeric keypad. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.”

Receiving Buffer - USB

Allows you to change the input buffer memory capacity for USB interface within the range of 64–1,024 KB in 32 KB increments using the scroll buttons or the numeric keypad. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.”

Receiving Buffer - LPD Spool

Allows you to change the input buffer memory capacity for LPD interface. The currently available memory will be displayed at the top of the screen with the following message: “Memory Available: XXX MB.”

Off

Allows you to change the memory capacity within the range of 1024–2048 KB in 32 KB increments using the scroll buttons or the numeric keypad.

Memory

Allows you to change the memory capacity within the range of 0.50–32.00 MB in 0.25 MB increments using the scroll buttons or the numeric keypad.

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 221